Skip header and navigation
Search Options
See advanced search tips page

7 records – page 1 of 1.

Material
METAL-STEEL; PAINT
Description
Cylinder cap is an orange, rounded, dome structure with two oval holes in the middle perpendicular to each other. The bottom is open and there are threads on the inside which are beginning to rust. Below each oval hole on the cylinder is a smaller hole. The orange paint is knicked and chipped all…
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ENERGY PRODUCTION TOOLS AND EQUIPMENT
Description
Cylinder cap is an orange, rounded, dome structure with two oval holes in the middle perpendicular to each other. The bottom is open and there are threads on the inside which are beginning to rust. Below each oval hole on the cylinder is a smaller hole. The orange paint is knicked and chipped all over.
History Of Use
Cylinder cap is used as a cover on the nozzle of the 100 pound propane tanks.
Material
METAL-STEEL; PAINT
Height
15
Diameter
Base: 9
Circumference
29
Units Of Measurement
Centimeters
Accession No.
1996.0025.0001
Photograph or Negative No.
None
Type of Record
Museum Artifact
Material
METAL-STEEL;
Description
Valve has red, round, spoked handle on top connected by two nuts and a threaded bolt to a 17cm round metal shaft. At the end of shaft is a rounded metal insert with one flat side which retracts up into the shaft by adjusting a set screw on the side.
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ENERGY PRODUCTION TOOLS AND EQUIPMENT
Description
Valve has red, round, spoked handle on top connected by two nuts and a threaded bolt to a 17cm round metal shaft. At the end of shaft is a rounded metal insert with one flat side which retracts up into the shaft by adjusting a set screw on the side.
History Of Use
Valve was used to extract fuel from barrels or oil drums on the C.N.R.
Material
METAL-STEEL;
Width
8
Length
32.5
Units Of Measurement
Centimeters
Accession No.
1996.0090.0001
Photograph or Negative No.
None
Type of Record
Museum Artifact
Material
METAL / ALLOY - UNKNOWN
Description
A grey metal can with a moveable spout and a thick, flat handle. The top of the can has a thick lid and inside is a mechanism to release oil into the spout. Embossed on the front is "GAL LIQD TRADE MARK BROOKING CINCINNATI. O. MADE IN USA".
  2 Images  
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ENERGY PRODUCTION TOOLS AND EQUIPMENT
Description
A grey metal can with a moveable spout and a thick, flat handle. The top of the can has a thick lid and inside is a mechanism to release oil into the spout. Embossed on the front is "GAL LIQD TRADE MARK BROOKING CINCINNATI. O. MADE IN USA".
Narrative
Molly Polysou moved to the Bulkley Valley in the 1940s from Austria with her husband. Mr. Polysou worked as a manager for Pacific Northern Gas and died in 1999.
Material
METAL / ALLOY - UNKNOWN
Height
23
Diameter
(base) 14
Units Of Measurement
Centimeters
Number Of Parts
1
Accession No.
1999.9.3
Type of Record
Museum Artifact
Images
Material
PAPER-CARDBOARD;
Description
A small empty cardboard match folder with "HEGGIE'S CAFE Good As the Best Better than The Best Smithers B.C. printed on the front, against an orange background. On the back is a picture of a tall girl and cocktail glass against a pale blue background, Below her is printed "Figures Don't Lie ". On t…
Title
Heggie's Cafe
Manufacturer
Strike Rite Matches Ltd
Original Owner
Heggie's Cafe, Smithers, BC
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ENERGY PRODUCTION TOOLS AND EQUIPMENT
Place Of Manufacture
Canada: London
Description
A small empty cardboard match folder with "HEGGIE'S CAFE Good As the Best Better than The Best Smithers B.C. printed on the front, against an orange background. On the back is a picture of a tall girl and cocktail glass against a pale blue background, Below her is printed "Figures Don't Lie ". On the bottom of the folder is Strike Rite Matches Ltd London, Ont. At the bottom of the inside front cover is printed 'Close Cover Before Striking" in capital letters.
Material
PAPER-CARDBOARD;
Accession No.
2016.22.1
Type of Record
Museum Artifact
Material
METAL / ALLOY - UNKNOWN
Description
A black metal pot with a battered spout and a thick, flat handle. The top has a raised circle with a lid that is fastened tightly to the opening.
  1 Image  
Other Names
Oil Injector
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ENERGY PRODUCTION TOOLS AND EQUIPMENT
Description
A black metal pot with a battered spout and a thick, flat handle. The top has a raised circle with a lid that is fastened tightly to the opening.
Material
METAL / ALLOY - UNKNOWN
Height
15.5
Width
11
Length
28
Units Of Measurement
Centimeters
Number Of Parts
1
Accession No.
1983.20.2
Type of Record
Museum Artifact
Images
Material
METAL-STEEL; WOOD - UNKNOWN
Description
A long narrow "V" shaped metal rod with a wood handle. Metal rod is 55 cm long and wooden handle 10.5cm long. Wooden handle is secured to metal rod with a wide metal band. The word OUZY is marked on one side of the rod just above where it is inserted into the wood handle.
  1 Image  
Category
COMMUNICATION OBJECTS
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ENERGY PRODUCTION TOOLS AND EQUIPMENT
Description
A long narrow "V" shaped metal rod with a wood handle. Metal rod is 55 cm long and wooden handle 10.5cm long. Wooden handle is secured to metal rod with a wide metal band. The word OUZY is marked on one side of the rod just above where it is inserted into the wood handle.
Material
METAL-STEEL; WOOD - UNKNOWN
Accession No.
1983.59.1
Type of Record
Museum Artifact
Images
Description
a: Black metal elongated sphere case with rounded holes on front and sides. Holes on back have a slightly longer top, likely for hanging the device with hooks. Bottom is engraved with: "Northern Electric Company Limited / Made in Canada" b) Black metal lid, engraved with same information as above.…
  3 Images  
Manufacturer
Northern Electric Company Limited
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ENERGY PRODUCTION TOOLS AND EQUIPMENT
Place Of Manufacture
Canada
Description
a: Black metal elongated sphere case with rounded holes on front and sides. Holes on back have a slightly longer top, likely for hanging the device with hooks. Bottom is engraved with: "Northern Electric Company Limited / Made in Canada" b) Black metal lid, engraved with same information as above. c) cardboard insert
Number Of Parts
2
Accession No.
1986.35.1 a-c
Type of Record
Museum Artifact
Images

7 records – page 1 of 1.