More like 'Block Plane'

2159 records – page 1 of 108.

Block Plane

https://search.bvmuseum.org/link/artifacts44
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
Long, dark wooden plane with a saw handle mounted just behind the wedge and blade. Weighs approx 7 3/4 pounds. "E.HANN" is stamped near the handle.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Long, dark wooden plane with a saw handle mounted just behind the wedge and blade. Weighs approx 7 3/4 pounds. "E.HANN" is stamped near the handle.
History Of Use
Ernest Hann 1889 - 1982. Mr. Hann arrived in Smithers in 1913. He worked as a carpenter with a contracting business. For more info see Historical Research file: Hann, Ernest/Addie. This block plane could be used in a similar manner that the Jack plane was used. In an interview with Fred Hofsink, he stated that sometimes, at this size, they were referred to as both, (depending on who it was, where the carpenter learned his skill, who he had as a teacher and what country they came from). Regardless, this plane was used to smooth out corners and camfers, level off planks or to smooth wooden pieces into the exact shape needed. They were sometimes used on floor planks to make them fit closer. The rule for long planes is "the longer the plane, the smoother the cut".
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Inscriptions
E.HANN
Height
18.5
Width
8
Length
56
Units Of Measurement
Centimeters
Accession No.
1971.4.11
Type of Record
Museum Artifact

Images

Less detail

Block Plane

https://search.bvmuseum.org/link/artifacts372
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
Brown wooden block plane with slightly curved sides and squared off ends. It has a wooden wedge that prevents the metal blade from moving. The wedge & blade could not be removed for closer inspection. The blade is set with its bevel up and sharp edge down. There are 4 small holes in the bottom. An …
Manufacturer
Varvill & Sons
Manufacturer Notes
According to a contemporary advertisement found online in the Ampleforth Journal, Robert Varvill & Sons were wholesale ironmongers, "Tool manufacturers, bar iron & steel merchants, dealers in paints, gilts, and colours" located at Bridge Street and Ebor Works, North Street in York
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Place Of Manufacture
Great Britain
Description
Brown wooden block plane with slightly curved sides and squared off ends. It has a wooden wedge that prevents the metal blade from moving. The wedge & blade could not be removed for closer inspection. The blade is set with its bevel up and sharp edge down. There are 4 small holes in the bottom. An inscription in the wood at one end reads "R. KERRY / VARVILL & SONS / EBOR WORKS / YORK"
History Of Use
The block plane was designed to be used with one hand. It received its name because of its block shape. They were especially used for fine cabinetry and model work. It can also be used for all ordinary work that does not require the plane to be adjusted frequently.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Inscriptions
R. Kerry
Varville & Sons
York
Height
12.5
Width
7.7
Length
21
Units Of Measurement
Centimeters
Accession No.
1978.140.14
Type of Record
Museum Artifact

Images

Less detail

Block Plane

https://search.bvmuseum.org/link/artifacts727
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
Long wooden plane with a broken handle, wide base and cutter, wedge well-used and marked. Part 'a' is the base, part 'b' is a handle, part 'c' is a metal blade, part 'd' is a wooden wedge. Parts b-d are all detachable.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Long wooden plane with a broken handle, wide base and cutter, wedge well-used and marked. Part 'a' is the base, part 'b' is a handle, part 'c' is a metal blade, part 'd' is a wooden wedge. Parts b-d are all detachable.
History Of Use
Most block planes are designed to be used with one hand. They are especially useful for fine cabinetry and model work. Because the blade is set at such a low angle, it is the most effective one to use on end grain. It is also the handiest tool for planning corners and camfers as they do not have long fronts. They received their names specifically because of their shape.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
7.5
Width
7
Length
56.5
Units Of Measurement
Centimeters
Accession No.
1983.67.5 a-d
Type of Record
Museum Artifact
Less detail

COMPASS PLANE

https://search.bvmuseum.org/link/artifacts697
Material
METAL-STEEL;
Description
A Black metal plane with adjustable shoe consisting of a flexible piece of metal on the bottom with upright hinges at both ends. These hinges connect to flat metal levers which adjust the flexibility of the shoe. The round knob called a horn is attached to these, and controls the leverage & adjust…
Manufacturer
Stanley Tools
Other Names
PLANE,ADJUSTABLE CIRCULAR
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Place Of Manufacture
CANADA
Description
A Black metal plane with adjustable shoe consisting of a flexible piece of metal on the bottom with upright hinges at both ends. These hinges connect to flat metal levers which adjust the flexibility of the shoe. The round knob called a horn is attached to these, and controls the leverage & adjustments. Across from this is an angled plate that supports the wedge and bit. The handle is attached at the top and a screw below that adjusts the depth of the cut. The bit has 2 plates, secured by a skew that can adjust the depth of the bevelled cutting edge. The wedge has a door lock/release handle to secure it in place. This mounts on the outside of the bit. The whole thing weighs approx. 3 - 4 pounds.
History Of Use
Ernest Hann 1889 - 1982. Mr. Hann arrived in 1913 as a carpenter and soon had his own contracting business. For more info see Historical Research file: Hann,Ernest/Addie. This is just one of the many types of adjustable circular planes. Its steel face can be easily shaped to any required art, either concave or convex. It is adjustable by turning the knob on the front of the plane.
Material
METAL-STEEL;
Height
15
Width
6
Length
26
Units Of Measurement
Centimeters
Accession No.
1983.0032.0005 a-c
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

Jack Plane

https://search.bvmuseum.org/link/artifacts186
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
An all wood jack plane with wooden knob at one end and a whittled upright handle at the other (removable). In the middle is a metal cutter with wooden wedge to secure blade (secured so well, it could not be removed). The knob handle at the front is secured to the plane with a large screw drilled d…
Manufacturer
Ohio Tool Co.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Place Of Manufacture
UNITED STATES
Description
An all wood jack plane with wooden knob at one end and a whittled upright handle at the other (removable). In the middle is a metal cutter with wooden wedge to secure blade (secured so well, it could not be removed). The knob handle at the front is secured to the plane with a large screw drilled down the middle. The cutters exposed metal has the manufactures stamp 'OHIO TOOL CO / COLUMBUS OHIO USA' with what appears to be a stamp of the world.
History Of Use
No history at this time on the donor, Joe Adams. Jack planes were made for the hardest and roughest work. The large cutter was usually slightly convex for rapid removal of excess stock. Wooden jack planes range from 14 to 18 inches. The newer, all metal variety are usually a uniform 14 inches.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
7
Width
7
Length
40.5
Units Of Measurement
Centimeters
Accession No.
1971.98.1
Type of Record
Museum Artifact

Images

Less detail

Jack Plane

https://search.bvmuseum.org/link/artifacts275
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
A relatively long wooden plane (a) with a plane type handle as opposed to a saw type handle. It has a knob, (for pushing) on one end and a metal casing that encompasses the handle, knob and all adjustable parts. The black lever (b) and double iron or blade (c) are removable. The double iron has a…
Manufacturer
Stanley
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Start Date
1892
Period or Date Notes
Internet searches suggest that APL 19 92 refers to April 19, 1892
Description
A relatively long wooden plane (a) with a plane type handle as opposed to a saw type handle. It has a knob, (for pushing) on one end and a metal casing that encompasses the handle, knob and all adjustable parts. The black lever (b) and double iron or blade (c) are removable. The double iron has an inscription: "STANLEY PAT. APL 19.92"
History Of Use
No personal history found on the donor. The bench planes in common use were the smooth, jack, fore, and jointer types. This jack plane removed rough surfaces and evened out surfaces. The fore plane had its blade closer to the front and the jack's cutter was more in the middle of the plane. The fore type were up to 28 inches while the jack was up to 32 inches long.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
4.8
Width
7.7
Length
64
Units Of Measurement
Centimeters
Accession No.
1975.110.1 a-c
Type of Record
Museum Artifact

Images

Less detail

MOLDING PLANE

https://search.bvmuseum.org/link/artifacts308
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
A small wooden plane that can fit the palm of your hand. It has a rounded bottom. The metal blade is half moon shape with a wood wedge to hold it in place. There is an engraved design on the top along the entrance of the throat. The bevelled blade faces up & barely extends past the bottom open…
Other Names
PLANE,COVE
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
A small wooden plane that can fit the palm of your hand. It has a rounded bottom. The metal blade is half moon shape with a wood wedge to hold it in place. There is an engraved design on the top along the entrance of the throat. The bevelled blade faces up & barely extends past the bottom opening.
History Of Use
No information on donor, Joe Adams. This plane is an extension of the many different types of moulding planes. It is a non-adjustable curved bottom wood plane for working curved surfaces such as coach door panels, wheels, arches, etc. It carved a cove or hollow shape.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
5.4
Width
5
Length
12.3
Units Of Measurement
Centimeters
Accession No.
1977.33.2
Type of Record
Museum Artifact

Images

Less detail

MOULDING PLANE

https://search.bvmuseum.org/link/artifacts693
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
Small wooden plane with a wooden wedge & metal cutting edge inserted at an angle through the plane; the cutting edge has a reversed bevelled edge; slightly rounded bottom on the plane
Other Names
PLANE,COVE
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Small wooden plane with a wooden wedge & metal cutting edge inserted at an angle through the plane; the cutting edge has a reversed bevelled edge; slightly rounded bottom on the plane
History Of Use
Ernest Hann 1898 - 1982. Mr. Hann arrived in Smithers in 1913. He was a carpenter by trade and instrumental in building this community. For more info, see Historical Research file, Hann,Ernest/Addie. This is a type of moulding plane which creates grooves. This type of moulding design is the kind that is used against the ceiling. The small hole was for hanging it up on his shop wall.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
10.5
Width
2
Length
26.7
Units Of Measurement
Centimeters
Accession No.
1983.0032.0001
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

MOULDING PLANE

https://search.bvmuseum.org/link/artifacts694
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
Dark brown rectangular plane with removable metal bit and wooden wedge. The wooden wedge has a scrolled handle and holds the cutter in place. The cutter has 3 teeth and cuts a triple 'bead'. The bottom of the plane is consistent with the teeth for design.
Other Names
PLANE,CROWN
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Dark brown rectangular plane with removable metal bit and wooden wedge. The wooden wedge has a scrolled handle and holds the cutter in place. The cutter has 3 teeth and cuts a triple 'bead'. The bottom of the plane is consistent with the teeth for design.
History Of Use
Ernest Hann 1898 - 1982. For more info see Historical Research file: Hann,Ernest/Addie. A carpenters tool chest often had more than 20 molding planes. This design came in sets of 8 ranging from 1/8 " to 1". This type of plane can create every shape imaginable, either by itself or in combination with other planes. The strip between the wall and ceiling was the identification of a fine room as well as the mark of the craftsman.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
8.6
Width
3.5
Length
24.1
Units Of Measurement
Centimeters
Accession No.
1983.0032.0002 a-c
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

MOULDING PLANE

https://search.bvmuseum.org/link/artifacts696
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
A very small compact plane with a rounded bottom. The bevelled blade is protruding slightly. The top is flat with a removable wooden wedge. The piece of iron wedge is not removable.
Other Names
PLANE,COMPASS
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
A very small compact plane with a rounded bottom. The bevelled blade is protruding slightly. The top is flat with a removable wooden wedge. The piece of iron wedge is not removable.
History Of Use
Ernest Hann 1889 - 1982. Mr. Hann was a pioneer contractor that settled in Smithers in 1913. For more info see Historical Research File: Hann,Ernest/Addie. This is one of the many types of compass planes. There is a number of adjustable & non adjustable curved bottom wood or metal planes made for working carved surfaces such as coach door panels, wheels, arches etc. Quite a few of Mr. Hann's planes have the look of being homemade; this is because they are. He was a fine craftsman and in those times, craftsman usually made their own tools. In speaking with a craftsman today, one mentioned these planes would not be used today, rather the moulding and planning would all be done with the various electric woodworking tools used today, i.e.; the band saw, routers, etc.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
6.2
Width
4
Length
11
Units Of Measurement
Centimeters
Accession No.
1983.0032.0004 a-b
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

Moulding Plane

https://search.bvmuseum.org/link/artifacts107
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
A narrow, single wedge, and blade plane with a convex bottom. The wedge has a notch carved into it. It has a wide fence on one side; the other side is flat. The bottom is half moon shape with a small side lip used for guiding. The blade is beveled and forked.
Manufacturer
J. Dawson, Montreal
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Place Of Manufacture
CANADA
Description
A narrow, single wedge, and blade plane with a convex bottom. The wedge has a notch carved into it. It has a wide fence on one side; the other side is flat. The bottom is half moon shape with a small side lip used for guiding. The blade is beveled and forked.
Narrative
This plane is one of 3 donated by Angus Kerr; 1971.52.3 a-c
History Of Use
Mr. Angus Kerr settled in the Quick area and began farming. Kerr road is named after him. He passed away in Oct.94. No other information available at this time. This is one of the 3 different moulding planes donated by him. This plane is smaller than the other two. It is called a Hollow or Fork Staff because it has a groove beside the hollow and the blade is forked. These type of moulding were used to define the ceilings from the walls and for trim on other things.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
14.5
Width
5.2
Length
24.3
Units Of Measurement
Centimeters
Accession No.
1971.52.3 a
Type of Record
Museum Artifact

Images

Less detail

Moulding Plane

https://search.bvmuseum.org/link/artifacts108
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Description
Dark, brown, wooden, narrow plane with a broken wedge in the throat. One side is flat while the other has a wide fence. This side also has beveled corners. The wedge has a deep beveled cutting edge.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Dark, brown, wooden, narrow plane with a broken wedge in the throat. One side is flat while the other has a wide fence. This side also has beveled corners. The wedge has a deep beveled cutting edge.
Narrative
This plane is 1 of 3 donated by Angus Kerr -1971.52.3 a-c
History Of Use
One of the 3 moulding planes donated by Mr. Angus Kerr. This plane has a small crown shape. The fence on the side kept the plane going straight. More commonly used for chairs, wall trim or areas that required 'fancy' trim.
Material
WOOD-UNKNOWN; METAL/ALLOY-UNKNOWN;
Height
15.5
Width
5.2
Length
24
Units Of Measurement
Centimeters
Accession No.
1971.52.3 b
Type of Record
Museum Artifact

Images

Less detail

Moulding Plane

https://search.bvmuseum.org/link/artifacts109
Material
METAL/ALLOY-UNKNOWN; WOOD-UNKNOWN;
Description
Narrow wooden plane with two wedges & blades. It has a fence on both sides and the bottom is half moon shape but larger than its counterpart 1971.52.1.A. There are 2 blades that shape with a bevelled edge.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Narrow wooden plane with two wedges & blades. It has a fence on both sides and the bottom is half moon shape but larger than its counterpart 1971.52.1.A. There are 2 blades that shape with a bevelled edge.
Narrative
This plane is 1 of 3 donated by Angus Kerr - 1971.52.3c
History Of Use
One of the 3 molding planes in this series, donated by Mr. Angus Kerr. A well equipped carpenter's chest often had twenty or more moulding planes. This nosing plane is used to cut the half-round fronts of stair treads, and closet rods. This plane could cut full rounds from any shape or size of wood.
Material
METAL/ALLOY-UNKNOWN; WOOD-UNKNOWN;
Height
15.3
Width
6
Length
24
Units Of Measurement
Centimeters
Accession No.
1971.52.3 c
Type of Record
Museum Artifact

Images

Less detail

Plane

https://search.bvmuseum.org/link/artifacts2247
Material
WOOD-UNKNOWN; METAL-STEEL;
Description
Wood Plane, Long, wooden handmade plane with a curved wooden handle on the top. In front of the handle is the opening for the plane which has a wooden rectangular brace with the metal blade set in behind it. Stamped on one end is "H.D. HEGGIE" in a three sided triangle. Stamped above the triangle i…
Title
Wood Plane
Original Owner
D. Heggie, Sr.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Wood Plane, Long, wooden handmade plane with a curved wooden handle on the top. In front of the handle is the opening for the plane which has a wooden rectangular brace with the metal blade set in behind it. Stamped on one end is "H.D. HEGGIE" in a three sided triangle. Stamped above the triangle is "D. MALLOCH and "PERTH" underneath.. What appear to be finger indents on the top side of both ends - one on each side of the plane. Possibly for more stability when using the plane.
History Of Use
Dig Heggie Senior's tools brought to Farnworth's by Heggie Jr.
Material
WOOD-UNKNOWN; METAL-STEEL;
Height
8.7 cm
Width
7.5 cm
Length
56 cm
Units Of Measurement
Centimeters
Dimension Notes
Measurements are for base
Accession No.
2009.14.10
Type of Record
Museum Artifact
Less detail

Plane

https://search.bvmuseum.org/link/artifacts2248
Material
METAL-STEEL
Description
Smalll flat bladed steal plane with scored sides for gripping.There are two adjustable serarated topped screws - one below the handle.and one at the back end of the plane mechanism. Stamped in a circle on top of the handle is; 'PRESTON PATENT WITH E P' within a smaller design in the centre.
Title
Steel Plane
Original Owner
D. Heggie Sr.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Smalll flat bladed steal plane with scored sides for gripping.There are two adjustable serarated topped screws - one below the handle.and one at the back end of the plane mechanism. Stamped in a circle on top of the handle is; 'PRESTON PATENT WITH E P' within a smaller design in the centre.
History Of Use
Dig Heggie Senior's tools brought to Farnworth's by Heggie Jr.
Material
METAL-STEEL
Height
6.0 cm
Width
2.8 cm
Length
10.0 cm
Units Of Measurement
Centimeters
Accession No.
2009.14.11
Type of Record
Museum Artifact
Less detail

Plane

https://search.bvmuseum.org/link/artifacts2254
Material
WOOD-UNKNOWN; METAL ALLOY/UNKNOWN
Description
Wood Plane, handmade with a square, oval shape to it. Base is 20.5cm long, 6.7cm wide and 7.6 deep with the handle and blade extending above it.The top has a 6.2 cm opening where the wooden handle with the blade behind extend into it. The opening is shaped so the handle fits in snuggly. It is wide …
Title
Wood Plane
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Wood Plane, handmade with a square, oval shape to it. Base is 20.5cm long, 6.7cm wide and 7.6 deep with the handle and blade extending above it.The top has a 6.2 cm opening where the wooden handle with the blade behind extend into it. The opening is shaped so the handle fits in snuggly. It is wide enough to hold any shavings. There is a round wooden plug on the back end of the base and 2 small finger size indentations on either side at the opposite front end. Possibly used as a grip to hold the plane in place.
History Of Use
D. Heggie Senior's tools brought to Farnworth's by Heggie Jr.
Material
WOOD-UNKNOWN; METAL ALLOY/UNKNOWN
Width
6.7 cm
Length
20.5 cm
Depth
7.6 cm
Units Of Measurement
Centimeters
Dimension Notes
Dept is for wooden base only
Accession No.
2009.14.6
Type of Record
Museum Artifact
Less detail

Plane

https://search.bvmuseum.org/link/artifacts3819
Material
WOOD-UNKNOWN; METAL-STEEL;
Description
A small handmade wooden plane with a wooden handle and metal blade. The back has a 4.0 cm deep long indent section the length of the plane with a V shaped wedge cut out for the blade. The wood handle is inserted behind the blade area. The blade itself does not extend beyond the base but is just i…
Title
Wood
Original Owner
Dig Heggie Sr.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
A small handmade wooden plane with a wooden handle and metal blade. The back has a 4.0 cm deep long indent section the length of the plane with a V shaped wedge cut out for the blade. The wood handle is inserted behind the blade area. The blade itself does not extend beyond the base but is just inside the base.The bottom 1.6 cm of the front is gently angled downwards. The wood is soiled from use and the blade is rusty.
History Of Use
Used by Dig Heggie
Material
WOOD-UNKNOWN; METAL-STEEL;
Height
14.5cm
Length
24cm
Units Of Measurement
Centimeters
Dimension Notes
Height measurment taken from base of blane to top of handle
Accession No.
2009.14.2 a
Type of Record
Museum Artifact
Less detail

Plane

https://search.bvmuseum.org/link/artifacts3823
Material
WOOD-UNKNOWN; METAL-STEEL;
Description
A small wooden plane with a thin narrow blade inserted behine the carved wooden handle
Title
Wood Plane
Original Owner
D. Heggie, Sr.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
A small wooden plane with a thin narrow blade inserted behine the carved wooden handle
History Of Use
Used by D. Heggie Sr. for woodworking
Material
WOOD-UNKNOWN; METAL-STEEL;
Accession No.
2009.14.5
Type of Record
Museum Artifact
Less detail

Plane

https://search.bvmuseum.org/link/artifacts3910
Description
Part a is the wood plane with "J. Pearce / New York / No. 109" stamped on one end. Part b is the blade, inscriped "The Chapin-Stephens Co. / Pine Meadow USA" Part c is the wood insert with the blade
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Part a is the wood plane with "J. Pearce / New York / No. 109" stamped on one end. Part b is the blade, inscriped "The Chapin-Stephens Co. / Pine Meadow USA" Part c is the wood insert with the blade
Accession No.
2017.139.1 a-c
Type of Record
Museum Artifact

Images

Less detail

Plane

https://search.bvmuseum.org/link/artifacts2257
Material
WOOD-UNKNOWN; METAL-STEEL;
Description
Wood Plane, A long handmade plane with a metal insert for the plane blade. There is a round wooden handle in front of the metal insert and awooden handle behind the insert. There seem to be no identifying marks on this plane like there are on the other planes in this grouping. Plane blade is missin…
Title
Wood Plane
Original Owner
D. Heggie, Sr.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
WOODWORKING TOOLS AND EQUIPMENT
Description
Wood Plane, A long handmade plane with a metal insert for the plane blade. There is a round wooden handle in front of the metal insert and awooden handle behind the insert. There seem to be no identifying marks on this plane like there are on the other planes in this grouping. Plane blade is missing.
History Of Use
Dig Heggie Senior's tools brought to Farnworth's by Heggie Jr.
Material
WOOD-UNKNOWN; METAL-STEEL;
Width
7.0 cm
Length
38.0 cm
Depth
4.0 cm
Units Of Measurement
Centimeters
Dimension Notes
Base measurments only
Accession No.
2009.14.9
Type of Record
Museum Artifact
Less detail

2159 records – page 1 of 108.