More like 'Bellows'

1975 records – page 1 of 99.

AHREM'S Goodline Saw Setting Tool

https://search.bvmuseum.org/link/artifacts836
Material
METAL-STEEL;
Description
This tool looks like a small pair of pliers with an adjusting screw on the top side that is hooked up to a spring for spring action handles. The steel has an engraved pattern on the handles.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
This tool looks like a small pair of pliers with an adjusting screw on the top side that is hooked up to a spring for spring action handles. The steel has an engraved pattern on the handles.
History Of Use
This item can be found in the old Marshall-Wells catalogue. It was made especially to set teeth on Swedish Hand or Back saws, but could be used on any ordinary hand or Pulp Saw. Made of Henry Broker's Arrow Stamped steel. This tool sold for $1.60 each.
Material
METAL-STEEL;
Length
18.2
Units Of Measurement
Centimeters
Accession No.
1987.46.1
Type of Record
Museum Artifact

Images

Less detail

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1535
Material
METAL-STEEL;
Description
Air hammer drill bit has a 14cm shank with a arrow-head shape bit with tip filed off. The last 6cm of the shank is smaller in circumference in order for it to fit in chuck of air hammer. Visible cast markings on the shank: 'M2'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer drill bit has a 14cm shank with a arrow-head shape bit with tip filed off. The last 6cm of the shank is smaller in circumference in order for it to fit in chuck of air hammer. Visible cast markings on the shank: 'M2'.
History Of Use
Bit used in air hammer for assorted use.
Material
METAL-STEEL;
Width
3
Length
20.5
Units Of Measurement
Centimeters
Accession No.
1996.0010.0001
Type of Record
Museum Artifact
Less detail

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1536
Material
METAL-STEEL;
Description
Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
History Of Use
Bit used in air hammer for different purposes.
Material
METAL-STEEL;
Length
17
Circumference
7
Units Of Measurement
Centimeters
Accession No.
1996.0011.0001
Type of Record
Museum Artifact
Less detail

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1616
Material
METAL-STEEL;
Description
Air hammer bit is a round, cylindrical item with the end 5cm squared off. There is a flat depression on the side measuring 2.25cm by 6cm, this part went in the chuck of air hammer to prevent bit from slipping.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer bit is a round, cylindrical item with the end 5cm squared off. There is a flat depression on the side measuring 2.25cm by 6cm, this part went in the chuck of air hammer to prevent bit from slipping.
History Of Use
Air hammer bit used for miscellaneous metalworking purposes.
Material
METAL-STEEL;
Width
3
Length
13.5
Units Of Measurement
Centimeters
Accession No.
1996.0091.0001
Type of Record
Museum Artifact
Less detail

AIR-HAMMER PUNCH

https://search.bvmuseum.org/link/artifacts1549
Material
METAL-STEEL;
Description
Air hammer punch is a solid, cylindrical metal object with a small notch on the side. The tip of punch has a tapered, round end with a small protruding, round notch on end. There is signs of wear on the tapered end of punch suggesting that it may have been modified. Some nicks in the metal on th…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer punch is a solid, cylindrical metal object with a small notch on the side. The tip of punch has a tapered, round end with a small protruding, round notch on end. There is signs of wear on the tapered end of punch suggesting that it may have been modified. Some nicks in the metal on the head.
History Of Use
Air hammer punch for multiple use in metalworking.
Material
METAL-STEEL;
Length
14
Circumference
7.5
Units Of Measurement
Centimeters
Accession No.
1996.0024.0001
Type of Record
Museum Artifact
Less detail

Anvil

https://search.bvmuseum.org/link/artifacts138
Material
METAL/ALLOY-IRON-WROUGHT;
Description
Anvil is a large black solid cast object with horn-like tip on it. There is a hardier hole on top (small square hole) 2cm by 2cm near the flat end of anvil. Beside hardier hole is a small 1cm hole in the corner. There is a 2.5cm by 2.5cm square hole running through the length of anvil. A 2.5cm by …
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Anvil is a large black solid cast object with horn-like tip on it. There is a hardier hole on top (small square hole) 2cm by 2cm near the flat end of anvil. Beside hardier hole is a small 1cm hole in the corner. There is a 2.5cm by 2.5cm square hole running through the length of anvil. A 2.5cm by 2.5cm square hole also exists underneath on the bottom surface of anvil. The top of anvil is 9cm wide. There are visible knicks on both sides of the anvil and '10' is cast on one side.
History Of Use
Anvil is the main tool used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
19
Length
45.5
Depth
24
Units Of Measurement
Centimeters
Accession No.
1971.64.11
Type of Record
Museum Artifact
Less detail

Awl

https://search.bvmuseum.org/link/artifacts594
Material
METAL-STEEL; WOOD-UNKNOWN;
Description
Small hand made awl with awl bound to wooden handle with string. Brown and white paint stains on the wood.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Small hand made awl with awl bound to wooden handle with string. Brown and white paint stains on the wood.
Material
METAL-STEEL; WOOD-UNKNOWN;
Length
9.8
Units Of Measurement
Centimeters
Accession No.
1981.71.3
Type of Record
Museum Artifact

Images

Less detail

BALL-PEEN HAMMER

https://search.bvmuseum.org/link/artifacts1582
Material
METAL-STEEL;
Description
Ball peen hammer has a long narrow handle with small hole in the hand and a modified hexagon head that appears to be two nuts on a large bolt welded to the handle. On one face of the hammer, the 2.5cm nut is slightly rounded on the end with a small round indentation in the center. The other face …
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Ball peen hammer has a long narrow handle with small hole in the hand and a modified hexagon head that appears to be two nuts on a large bolt welded to the handle. On one face of the hammer, the 2.5cm nut is slightly rounded on the end with a small round indentation in the center. The other face of the hammer is a 1cm wide hexagon bolt. Threads of the bolt are visible on the hammer head.
History Of Use
Ball peen hammer was used in metalworking and blacksmithing purposes. This particular hammer is homemade consisting of a large nut and bolt welded to a metal rod.
Material
METAL-STEEL;
Width
6.8
Length
34
Units Of Measurement
Centimeters
Accession No.
1996.0057.0001
Type of Record
Museum Artifact
Less detail

BEARING WRENCH

https://search.bvmuseum.org/link/artifacts1495
Material
METAL-STEEL;
Description
Wrench or bearing tool is a large open pipe socket item with four small tabs or dogs on one end. These 1.5cm dogs are for gripping the bearings. There are two aligned 2cm holes at opposite end of wrench for a handle for leverage.
Other Names
BEARING TOOL
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Wrench or bearing tool is a large open pipe socket item with four small tabs or dogs on one end. These 1.5cm dogs are for gripping the bearings. There are two aligned 2cm holes at opposite end of wrench for a handle for leverage.
History Of Use
Wrench or bearing tool was used on the C.N.R.. Wrench has four small tabs or dogs which line up in holes on various train parts & then a bar is put through the holes in the wrench using leverage to turn it and undo bearings.
Material
METAL-STEEL;
Length
18
Diameter
Outside: 12
Circumference
38.5
Units Of Measurement
Centimeters
Accession No.
1995.0070.0001
Type of Record
Museum Artifact
Less detail

BENCH GRINDER

https://search.bvmuseum.org/link/artifacts1569
Material
STONE; METAL-STEEL; PAINT
Description
Bench grinder is green with two small grinding wheels at either end and a clamp on bottom for securing to a work surface. One grindstone is 9cm in length and greyish in color. The texture is coarse and has small indents from use. The other grindstone wheel is a greenish-grey color, fine textured…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Bench grinder is green with two small grinding wheels at either end and a clamp on bottom for securing to a work surface. One grindstone is 9cm in length and greyish in color. The texture is coarse and has small indents from use. The other grindstone wheel is a greenish-grey color, fine textured and 2.2cm in length. There is a brace covering the larger grinding stone, it has a bolt and wingnut mechanism for securing items, it is hinged to the grinder body and has the visible markings 'D565' 'D-508' 'M-H'. The green round grinder body has a 7cm round extension out of the center with a bolt coming out of the top. Visible markings on green grinder body 'D500' 'M-H' and a white rectangular patch from possibly an old sticker or label.
History Of Use
Bench grinder used for miscellaneous metalworking purposes.
Material
STONE; METAL-STEEL; PAINT
Width
17
Length
34
Units Of Measurement
Centimeters
Accession No.
1996.0044.0001
Type of Record
Museum Artifact
Less detail

BLACKSMITH BLOWER

https://search.bvmuseum.org/link/artifacts1624
Material
METAL-STEEL; PAINT
Description
Blacksmith blower is round metal object with 17cm metal handle with wooden end and a visible metal fan like wheel inside a metal casing. Squared attached at the end with a round blower hole. Visible cast marks: 'CANADIAN BLOWER & FORGE CO. LTD.' 'KITCHENER, ONT.' on the fan casing mechanism and on…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Blacksmith blower is round metal object with 17cm metal handle with wooden end and a visible metal fan like wheel inside a metal casing. Squared attached at the end with a round blower hole. Visible cast marks: 'CANADIAN BLOWER & FORGE CO. LTD.' 'KITCHENER, ONT.' on the fan casing mechanism and on the opposite side of blower is the cast markings 'CAN. BLOWER & FORGE CO.' 'KITCHENER, ONT.'. Traces of red paint on the fan casing.
History Of Use
Blacksmith's blower was attached to the forge for blacksmithing purposes. The blower fed air on the coals to keep them hot when bending and working the metals.
Material
METAL-STEEL; PAINT
Height
29
Width
9.5
Length
29
Units Of Measurement
Centimeters
Accession No.
1996.0099.0001
Type of Record
Museum Artifact
Less detail

BLOCK SET

https://search.bvmuseum.org/link/artifacts1580
Material
METAL-STEEL; PAINT
Description
Block set is a black metal object with a thick handle and a square block head with one beveled edge. Handle is 8cm in length and has a rounded top with a 12cm circumference. Head is 3.5cm by 3.5cm with 'BRADGE Co.' cast in side.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Block set is a black metal object with a thick handle and a square block head with one beveled edge. Handle is 8cm in length and has a rounded top with a 12cm circumference. Head is 3.5cm by 3.5cm with 'BRADGE Co.' cast in side.
History Of Use
A block set for cross-cut saws was used while saw is in filing clamp.
Material
METAL-STEEL; PAINT
Height
12
Width
3.5
Depth
3.5
Circumference
12
Units Of Measurement
Centimeters
Accession No.
1996.0055.0001
Type of Record
Museum Artifact
Less detail

BOTTOM SWAGE

https://search.bvmuseum.org/link/artifacts1476
Material
METAL-STEEL;
Description
This bottom swage has a square steel head with a deep 1cm 'V' groove in center. The 7.5cm long squared extension fits in the hardie hole on the anvil.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
This bottom swage has a square steel head with a deep 1cm 'V' groove in center. The 7.5cm long squared extension fits in the hardie hole on the anvil.
History Of Use
Bottom swage is a blacksmith molding tool used with a top swage. The bottom swage fits in the hardie hole in the anvil . The top swage is handled and fits over it, then it is hammered to form and shape hot metal.
Material
METAL-STEEL;
Width
6.5
Length
10.5
Depth
6
Units Of Measurement
Centimeters
Accession No.
1995.0051.0001
Type of Record
Museum Artifact
Less detail

BOTTOM SWAGE

https://search.bvmuseum.org/link/artifacts1477
Material
METAL-STEEL;
Description
This bottom swage is a square metal head with a 3cm wide curve in the center. The 6.5cm long squared extension fits in the hardie hole on the anvil.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
This bottom swage is a square metal head with a 3cm wide curve in the center. The 6.5cm long squared extension fits in the hardie hole on the anvil.
History Of Use
The bottom swage is a blacksmith's rounding tool. It is used with a top swage and the bottom swage fits in the hardie hole on the anvil. The top swage is handled and located over the bottom swage and then hammered to form and shape hot metal.
Material
METAL-STEEL;
Width
6
Length
11
Depth
6
Units Of Measurement
Centimeters
Accession No.
1995.0052.0001
Type of Record
Museum Artifact
Less detail

BOTTOM SWAGE

https://search.bvmuseum.org/link/artifacts1478
Material
METAL-STEEL;
Description
The bottom fuller is a triangular shape with a rounded top and a 5cm extension that fits into the hardie hole on the anvil. Cast marks on the side are not legible.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
The bottom fuller is a triangular shape with a rounded top and a 5cm extension that fits into the hardie hole on the anvil. Cast marks on the side are not legible.
History Of Use
Bottom fuller is a blacksmithing tool used with an upper fuller. The bottom fuller fits in the hardie hole on the anvil and then the top fuller is hit by a hammer. The effect is to pinch and hollow the metal held between them.
Material
METAL-STEEL;
Width
6.5
Length
11
Depth
4
Units Of Measurement
Centimeters
Accession No.
1995.0053.0001
Type of Record
Museum Artifact
Less detail

CARRAIGE WRENCH

https://search.bvmuseum.org/link/artifacts1507
Material
METAL-STEEL;
Description
The carriage wrench has a double purpose head and a curved handle to another open end. The double purpose head has a closed hexagon head to accomodate 2.85cm nuts/bolts and a square open end with a 2.85cm opening. The other end of wrench has a 2.5cm open end. The metal is slightly cracked and twi…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
The carriage wrench has a double purpose head and a curved handle to another open end. The double purpose head has a closed hexagon head to accomodate 2.85cm nuts/bolts and a square open end with a 2.85cm opening. The other end of wrench has a 2.5cm open end. The metal is slightly cracked and twisted. The handle has a slight curve. Visible cast markings 'E13'.
History Of Use
Wrench used for taking buggy wheels off.
Material
METAL-STEEL;
Width
5.5
Length
23
Depth
1
Units Of Measurement
Centimeters
Accession No.
1995.0082.0001
Type of Record
Museum Artifact
Less detail

Carriage Wrench

https://search.bvmuseum.org/link/artifacts167
Material
METAL-STEEL;
Description
This tool is 23.7cm long and made of steel. On one end is a square shape and on the other end is a hexagon shape with 3/4 squares branching off three sides.
Other Names
Buggy Wrench
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
This tool is 23.7cm long and made of steel. On one end is a square shape and on the other end is a hexagon shape with 3/4 squares branching off three sides.
History Of Use
This tool was used for taking wheels off of buggies or carriages for greasing etc.
Material
METAL-STEEL;
Length
23.7
Units Of Measurement
Centimeters
Accession No.
1971.86.1
Type of Record
Museum Artifact

Images

Less detail

CENTER PUNCH

https://search.bvmuseum.org/link/artifacts864
Material
METAL-STEEL;
Description
The homemade punch appears to have been altered to accommodate for specific use. Chisel form with a flattened end then tapered to a semi fine point. Visible cast marks 'A K CN'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
The homemade punch appears to have been altered to accommodate for specific use. Chisel form with a flattened end then tapered to a semi fine point. Visible cast marks 'A K CN'.
History Of Use
Homemade punch used to start hole for drill bit.
Material
METAL-STEEL;
Length
18.5
Circumference
7
Units Of Measurement
Centimeters
Accession No.
1987.0053.0014
Type of Record
Museum Artifact
Less detail

CHISEL

https://search.bvmuseum.org/link/artifacts462
Material
METAL-STEEL;
Description
Chisel is an eight-sided punch tapering to a four-sided bit with a squared end. The last 5cm of the bit is slightly angled. Head is mushroomed from use. Three distinctive vertical marks on the side of chisel.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Chisel is an eight-sided punch tapering to a four-sided bit with a squared end. The last 5cm of the bit is slightly angled. Head is mushroomed from use. Three distinctive vertical marks on the side of chisel.
History Of Use
Chisel used for blacksmithing and metalworking purposes.
Material
METAL-STEEL;
Length
22.5
Circumference
7
Units Of Measurement
Centimeters
Accession No.
1979.0115.0045.10
Type of Record
Museum Artifact
Less detail

Chisel

https://search.bvmuseum.org/link/artifacts463
Material
METAL-STEEL;
Description
Chisel is a flat rectangular piece of metal with a thin tapered end and a small flat end.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Chisel is a flat rectangular piece of metal with a thin tapered end and a small flat end.
History Of Use
Chisel used for blacksmithing and metalworking purposes.
Material
METAL-STEEL;
Width
4.5
Length
26.5
Depth
0.5
Units Of Measurement
Centimeters
Accession No.
1979.115.45 k
Type of Record
Museum Artifact

Images

Less detail

1975 records – page 1 of 99.