More like 'FASTENER'

2109 records – page 1 of 106.

BONE CRUSHER

https://search.bvmuseum.org/link/artifacts417
Material
METAL-STEEL;
Description
The frame of this bone crusher consists of three legs at the bottom which is fastened to a malleable piece of iron. This piece of iron encapsulates the axle. Above the axle, the malleable piece of iron divides into two pieces. Each piece has a hole through the top where a metal rod is located. T…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
The frame of this bone crusher consists of three legs at the bottom which is fastened to a malleable piece of iron. This piece of iron encapsulates the axle. Above the axle, the malleable piece of iron divides into two pieces. Each piece has a hole through the top where a metal rod is located. The same rod is fastened to the large flywheel. The flywheel consists of a 54cm diam. wheel with a 12cm wooden handle. The same side has "JOLIET ILL., HUMPHREY & SONS" embossed and "4" imprinted on it. The other side of the wheel has a small gear fastened in the center of it. This small gear sits upon a larger gear that is fastened to the axle. The other side of the axle has an iron disk attached to it. One side of the disk has ridges while the other side is smooth. Three evenly spaced slits run from the center of the disk to the rim. Each slit has a blade fastened to one side. Beside the disk is a hopper with indecipherable letters on the face of it. The rim of the hopper is a separate piece of malleable iron. One part of the rim is ridged then it extends over the disk then onto the iron rod that's attached to the flywheel. A curved knob is attached near the end on top. A metal door that is shaped like the hopper is connected to part of the rim. It also connects to a wheel with a gear attached to the middle. This gear over along the ridged rim when the wheel turns. When the wheel turns the door also moves in the same direction. The face of the door has "PAT JULY 3, 1900, CANADA PATENTED 1901"
Narrative
'Farm Tools' by Michael Partridge, p.179
History Of Use
This bone crusher was used to grind up animal bones to make bone meal for fertilizer. This was a common practice still in the early 1900's until commercial fertilizer became more readily available. Bone crushers such as this one were used by farmers because animal bones were readily available on the farm and therefore were an inexpensive form of fertilizer. This bone crusher was used on the Bayson farm which was established in the late 1800's by an uncle of Fred Bayson. Fred took over the farm upon the death of his uncle in 1924 and worked at farming in the Bulkley Valley until his death in 1979.
Material
METAL-STEEL;
Height
115
Width
54
Length
49.5
Units Of Measurement
Centimeters
Accession No.
1979.115.12
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

Bull rake

https://search.bvmuseum.org/link/artifacts596
Material
WOOD-UNKNOWN;
Description
Wooden rake head. This rake consists of a long rectangular piece of wood with twelve wooden pegs attached to it. The pegs are evenly spaced and rounded at the ends. The pegs are held in place by small nails that are visible only on one side of the wood. The side also has three holes in it. A large …
Other Names
Hay drag
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Wooden rake head. This rake consists of a long rectangular piece of wood with twelve wooden pegs attached to it. The pegs are evenly spaced and rounded at the ends. The pegs are held in place by small nails that are visible only on one side of the wood. The side also has three holes in it. A large hole is in the center for a handle and a small hole on both ends.
History Of Use
This type of rake emerged in the 18th Century. It was used as a general all-purpose rake. According to a previous index card, the rake was made by Joe Burgon who was a pioneer in the Quick area in the early 1900's.
Material
WOOD-UNKNOWN;
Width
13
Length
64
Units Of Measurement
Centimeters
Accession No.
1981.72.1
Type of Record
Museum Artifact

Images

Less detail

COMPRESSED AIR SPRAYER

https://search.bvmuseum.org/link/artifacts1583
Material
METAL/ALLOY-BRASS; METAL/ALLOY-ALUMINUM; RUBBER;
Description
Compressed air sprayer is a large metal cylinder can with a hose and nozzle coming from the top. There is a greenish-blue canvas strap measuring 82cm in length and 2.5cm wide affixed to one side of sprayer with metal clips. The top cover and a 2cm circumference on the bottom of sprayer is a coppe…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Compressed air sprayer is a large metal cylinder can with a hose and nozzle coming from the top. There is a greenish-blue canvas strap measuring 82cm in length and 2.5cm wide affixed to one side of sprayer with metal clips. The top cover and a 2cm circumference on the bottom of sprayer is a copper color whereas the rest of sprayer is an aluminum color. There is a paper label on the sprayer 'R-L' 'ROOT -LOWELL' 'SPRAYER' '191C SURE-SEAL' with full instructions and care procedures for your sprayer. There are embossed markings on the can specifying quantity in '2L' '4L' '6L' '8L' '10L' as well as 'R-L' '2 GALLONS' '1 GALLON'. The hose is 94cm in length and a turquoise blue color. There is a 10cm thumb lever on the 48cm thin round copper nozzle, with a small bend in the end. No lid for sprayer.
History Of Use
Compressed air sprayer was designed to make your spraying job easier. It may have been used for dispersing insecticides, white wash, weed burner or cold water paints.
Material
METAL/ALLOY-BRASS; METAL/ALLOY-ALUMINUM; RUBBER;
Height
60.5
Diameter
Top: 12 Base: 19.5
Circumference
60.5
Units Of Measurement
Centimeters
Accession No.
1996.0058.0001
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

Floating Dairy Thermometer

https://search.bvmuseum.org/link/artifacts2990
Description
A floating Dairy Thermometer with a glass tube and white rope tied to a loop at one end. Inside is a white thermometer with red and black numbers. Written at the top is "TESTRITE MADE IN U.S.A." On the back are guidelines which read "A - Water Freezing (32 degrees); B - Churning (62 degrees); C - C…
Manufacturer
Testrite
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Place Of Manufacture
U.S.A.
Period or Date Notes
circa 1930s or 1940s
Description
A floating Dairy Thermometer with a glass tube and white rope tied to a loop at one end. Inside is a white thermometer with red and black numbers. Written at the top is "TESTRITE MADE IN U.S.A." On the back are guidelines which read "A - Water Freezing (32 degrees); B - Churning (62 degrees); C - Cheese (85 degrees); D - Scalding (145 degrees); E - Pasteurizing (165 degrees); F - Water Boiling (212 degrees); 45 degree cooling of milk for handling and shipping". The tip is black and red.
History Of Use
1
Length
9
Accession No.
2013.2.2
Type of Record
Museum Artifact

Images

Less detail

Fruit Picker

https://search.bvmuseum.org/link/artifacts492
Material
METAL-STEEL;
Description
Metal fruit picker made from tin with a rectangular box shape with an attached square handle. Box is hollow with a metal attached back. Bottom of box has brass spikes that extend outwards from front of box. There is an angled piece of metal on the inside of the box.
Other Names
berry picker
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Metal fruit picker made from tin with a rectangular box shape with an attached square handle. Box is hollow with a metal attached back. Bottom of box has brass spikes that extend outwards from front of box. There is an angled piece of metal on the inside of the box.
Narrative
Perface card: 1979-153-1
History Of Use
Handmade metal fruit picking tool that would have been held in the hand in order to pick the fruit. Apparently this fruit picker was given to Mrs. Panter in 1935 and was used to pick huckleberries. Made from tin with Brass Spikes. Made by Mr. Peter Berg of Smithers. Given to Mrs. Panter in 1935. Also used to pick huckleberries.
Material
METAL-STEEL;
Height
10
Width
9
Length
23
Units Of Measurement
Centimeters
Accession No.
1979.153.1
Type of Record
Museum Artifact

Images

Less detail

GARDEN CULTIVATOR

https://search.bvmuseum.org/link/artifacts1231
Material
METAL-STEEL;
Description
A dusty, brown all metal cultivator constructed of two long, hollow, tubular side pieces, two metal wheels and two plowshares. There is a narrower tube bolted across the side pieces near the top. The two parallel wheels are supported by a short axle bolted through each side piece at the front. T…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
A dusty, brown all metal cultivator constructed of two long, hollow, tubular side pieces, two metal wheels and two plowshares. There is a narrower tube bolted across the side pieces near the top. The two parallel wheels are supported by a short axle bolted through each side piece at the front. The small, sharp plowshares are angled upward on the outside ends, though the top of one has been broken off. They are positioned slightly behind the wheels and are fastened at the axle and both sides with metal braces and bolts. There are splashes of white paint on one of the handles.
History Of Use
Garden cultivator used to dig rows in ground by farmers. Initially, the cultivator was used by farmers to dig deep for weeds, roots, and stones in order to prepare land for planting. The advantages of the cultivator versus the plow was that the cultivativator could work deeper and could break up whole land. Over the years changes were made to the cultivator including the attachment of a seedbox to enable seeds to be sewn with the same piece of equipment.
Material
METAL-STEEL;
Height
97
Width
49
Length
147
Units Of Measurement
Centimeters
Accession No.
1991.0153.0001
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

GARDEN CULTIVATOR

https://search.bvmuseum.org/link/artifacts278
Material
METAL-STEEL;
Description
A: A dusty, brown all metal cultivator constructed of two long, hollow, tubular side pieces, two metal wheels and to plowshares. There is a narrower tube bolted across the side pieces near the top. The two parallel wheels are supported by a short axle bolted through each side piece at the front. …
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
A: A dusty, brown all metal cultivator constructed of two long, hollow, tubular side pieces, two metal wheels and to plowshares. There is a narrower tube bolted across the side pieces near the top. The two parallel wheels are supported by a short axle bolted through each side piece at the front. The small, sharp plowshares are angled upward on the outside ends. They are positioned slightly behind the wheels and are fastened at the axle and both sides with metal braces and bolts. B: Plowshare claw is curved and can be interchanged with wider plowshares that are currently on garden cultivator. C: Plowshare claw is curved and can be interchanged with wider plowshares that are currently on garden cultivator. D: Plowshare is an additional blade, similar to plowshare attached to cultivator but slightly wider. E: Small double ended wrench for interchanging plowshares. Wrench measures 9cm by 3cm.
History Of Use
Garden cultivator used to dig rows in the ground by farmers. Initially, the cultivator was used by farmers to dig deep for weeds, roots and stones in order to prepare land for planting. The advantages of the cultivator versus the plow was that the cultivator could work deeper and could break up whole land. Over the years changes were made to the cultivator including that attachment of a seed box to enable seeds to be sewn with the same piece of equipment.
Material
METAL-STEEL;
Width
25
Length
145
Depth
44
Units Of Measurement
Centimeters
Accession No.
1976.0031.0006 a-e
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

Garden plow

https://search.bvmuseum.org/link/artifacts1230
Material
METAL-STEEL;
Description
A long, narrow, iron plowshare fragment. The front is slightly concave and shaped to a thick, sharp, angled point. There are three holes placed at equal distances along the top edge and one hole at the point. The front of the holes are round and the backs are squared. The bottom of the plowshare ha…
Other Names
Plowshare
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
A long, narrow, iron plowshare fragment. The front is slightly concave and shaped to a thick, sharp, angled point. There are three holes placed at equal distances along the top edge and one hole at the point. The front of the holes are round and the backs are squared. The bottom of the plowshare has been ground to a cutting edge. On the back is imprinted 'BRADLEY' and 'T21L'
History Of Use
Plows were used on the farm to dig grooves into the soil in order that crops could be planted.
Material
METAL-STEEL;
Width
15.3
Length
61.3
Depth
9
Units Of Measurement
Centimeters
Accession No.
1991.152.1
Type of Record
Museum Artifact

Images

Less detail

Handheld Bug Sprayer

https://search.bvmuseum.org/link/artifacts1690
Material
METAL/ALLOY-TIN; WOOD-UNKNOWN;
Description
Fly-Tox, hand sprayer. The pump tub is blue and the tank can is gray and very rusted. It has a black wooden handle. Wording on pump is 'Fly-Tox', Kills flies, bed bugs, moths, ants, mosquitoes, roaches, fleas.(Made in U.S.A.).
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Fly-Tox, hand sprayer. The pump tub is blue and the tank can is gray and very rusted. It has a black wooden handle. Wording on pump is 'Fly-Tox', Kills flies, bed bugs, moths, ants, mosquitoes, roaches, fleas.(Made in U.S.A.).
Material
METAL/ALLOY-TIN; WOOD-UNKNOWN;
Width
7.5
Length
33
Units Of Measurement
Centimeters
Accession No.
1996.169.1
Type of Record
Museum Artifact

Images

Less detail

Hand seedbox seeder

https://search.bvmuseum.org/link/artifacts132
Material
FABRIC-CANVAS;
Description
A geared hand seeder. This hand seeder consists of a tan canvas bag that is nailed to a wooden rectangular base. Attached under the base at one end is an arched, short piece of wood that sticks out to one side and connects to a longer arched piece of wood that extends to the other side. The longer…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
A geared hand seeder. This hand seeder consists of a tan canvas bag that is nailed to a wooden rectangular base. Attached under the base at one end is an arched, short piece of wood that sticks out to one side and connects to a longer arched piece of wood that extends to the other side. The longer piece of wood also sticks out and has a 7.3cm long handle attached to the end of it. A rectangular piece of wood attaches to both arched pieces of wood. This rectangular piece then extends out to a formed "U" shaped piece of metal. This piece of metal is where a turning wire handle is located. This handle goes from one end of the "U" to the other end. In the middle of the "U" where the handle extends through is a round gear. The turning handle sticks out at an angle and has a round wooden knob fastened at the end. A larger gear is riveted to a malleable piece of iron that extends from the distributing wheel to the other end of the base. The distributing wheel consists of four formed blades that are attached to a disk with a small gear in the center of it.
Narrative
'Farm Tools' by Michael Partridge, p. 118-119
History Of Use
Seed sowers emerged during the 18th Century and replaced the throwing of seed by hand. The canvas bag containing seed was held close to the sower's chest by means of an attached leather strap. The movement of gear wheels and discs under the bag scattered the seeds as the sower walked.
Material
FABRIC-CANVAS;
Height
76
Width
33.5
Length
36.5
Units Of Measurement
Centimeters
Accession No.
1971.64.6
Type of Record
Museum Artifact

Images

Less detail

HAY KNIFE

https://search.bvmuseum.org/link/artifacts587
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Units Of Measurement
Centimeters
Accession No.
1981.0063.0002
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

Hay knife

https://search.bvmuseum.org/link/artifacts1234
Material
METAL/ALLOY-IRON-WROUGHT;
Description
A hay knife made of a single piece of iron. The long, black, curved blade has a deeply serrated edge. The shank is divided into two sections near the top, one section being bent to the side at a right angle. There are two, smooth wooden handles attached to the ends, the one at the side being perpen…
Other Names
Hay saw
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
A hay knife made of a single piece of iron. The long, black, curved blade has a deeply serrated edge. The shank is divided into two sections near the top, one section being bent to the side at a right angle. There are two, smooth wooden handles attached to the ends, the one at the side being perpendicular to the top.
Narrative
1908 Sears Roebuck Catalogue, p. 522
History Of Use
Hay knives were used to cut into the haystack--not for reaping hay which was done by a sickle. The design for this hay knife originated in 1850 and was called the 'Conneticut Hay Knife'.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
27
Length
97
Depth
13
Units Of Measurement
Centimeters
Accession No.
1991.156.1
Type of Record
Museum Artifact

Images

Less detail

HAY LIFTING FORK

https://search.bvmuseum.org/link/artifacts1236
Material
METAL-STEEL;
Description
This loader consists mainly of a 'U' shaped piece of metal. At each end of the 'U' are pointed pieces of metal that are attached to a rod that extends perpendiicular to the sides. Along the bar is a protruding piece of metal with a rectangular bar attached to it. A fan-like piece of metal is als…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
This loader consists mainly of a 'U' shaped piece of metal. At each end of the 'U' are pointed pieces of metal that are attached to a rod that extends perpendiicular to the sides. Along the bar is a protruding piece of metal with a rectangular bar attached to it. A fan-like piece of metal is also located along the bar. 'F17W' is embossed on the bar. The base of the 'U' has three different shaped pieces of metal attached to one side. The piece of metal in the middle of the base has a thin piece of metal riveted to it. This thin metal piece loops around the horizontal bar. One side is broken where the loop is riveted.
History Of Use
Metal hay-lifting fork. This piece of equipment was used on farms to lift large quantities of hay or straw directly from a wagon and onto a stack of hay. Apparently it was widely used on farms before the mechanical elevator was introduced.
Material
METAL-STEEL;
Width
21
Length
50
Units Of Measurement
Centimeters
Accession No.
1991.158.1
Type of Record
Museum Artifact
Less detail

Hay Loader

https://search.bvmuseum.org/link/artifacts781
Material
METAL-STEEL;
Description
A silver-painted, all metal device consisting of two sections with a pulley at the center. The top section consists of two similar pieces of cast iron, which are bolted together at the middle of the device. 'H406' is embossed on the inside of one, and 'H407' on the other. There is a small wheel (…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
A silver-painted, all metal device consisting of two sections with a pulley at the center. The top section consists of two similar pieces of cast iron, which are bolted together at the middle of the device. 'H406' is embossed on the inside of one, and 'H407' on the other. There is a small wheel (9.7cm in diameter) on each inside corner. The wheels each have a flat running surface and an outside lip. The front of segment 'H407' reads "MEYERS O.K. UNLOADER" with "M" (at the center) and "ASHLAND, O." around the bottom. This top section turns at the base. The bottom section is also constructed of two similar segments of cast iron, riveted together at the top of each end. Each end is rounded and hollow, so as to provide space for a large rope (though one corner is broken) "STEEL" & "BEARING" are embossed on each side. A single wheel, embossed with "H427" is attached at each end. At the middle of the section on either side is a metal clip with "H321" on it. It holds a large, brown metal pulley which has "MEYERS THE F. E. MEYERS & BRO. CO. ASHLAND, OHIO" EMBOSSED AROUND THE CENTER OF EACH SIDE. The pulley has a thick metal ring situated at the center.
Narrative
'Farm Tools Through The Ages', by Michael Partridge, p. 151-153
History Of Use
Hay loaders consisted of a wire cage with claw-like moving rakes mounted on a moving base. A loader was attached at the rear of a moving wagon and collected hay as the moving rake mechanism scooped hay up onto the wire cage 'conveyor belt' which in turn moved the hay into the wagon. This particular metal piece was probably a segment of the loader.
Material
METAL-STEEL;
Length
59
Depth
17
Units Of Measurement
Centimeters
Accession No.
1986.21.1
Type of Record
Museum Artifact
Less detail

MILL GRINDER

https://search.bvmuseum.org/link/artifacts104
Material
WOOD-UNKNOWN; METAL-STEEL;
Description
Feed grinder is a black metal funnel-like object with a large decorative spoked 50cm diameter wheel with a small wooden handle on the side. The wheel has visible cast markings 'ENTERPRISE MFG CO.' 'PHILADELPHIA USA' around the outer perimeter. The wheel is connected to an upright funneled spout w…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Feed grinder is a black metal funnel-like object with a large decorative spoked 50cm diameter wheel with a small wooden handle on the side. The wheel has visible cast markings 'ENTERPRISE MFG CO.' 'PHILADELPHIA USA' around the outer perimeter. The wheel is connected to an upright funneled spout with a three legged brace on the side for attaching to work surface. Visible cast markings on the side of funnel include 'NO. 650' and '2677' on the other side. Feed grinder is mounted on a wooden 'L' shaped brace with two diagonal pieces of wood connected to side and bottom for support.
History Of Use
Mill used for grinding grain from course to finer.
Material
WOOD-UNKNOWN; METAL-STEEL;
Height
73
Width
52.5
Length
51.5
Units Of Measurement
Centimeters
Accession No.
1971.0051.0001
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

Mower

https://search.bvmuseum.org/link/artifacts1068
Material
WOOD-UNKNOWN; METAL-STEEL;
Description
Mower is a metal structure with large teeth mower bar and two all metal rim and spoked wheels. Inside of the wheels 'M654' is cast and on the axel part of mower 'MASSEY HARRIS CANADA' 'NO 21 M768 SPECIAL' is cast.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Mower is a metal structure with large teeth mower bar and two all metal rim and spoked wheels. Inside of the wheels 'M654' is cast and on the axel part of mower 'MASSEY HARRIS CANADA' 'NO 21 M768 SPECIAL' is cast.
History Of Use
Horse drawn mower.
Material
WOOD-UNKNOWN; METAL-STEEL;
Height
165
Width
145
Length
315
Units Of Measurement
Centimeters
Dimension Notes
Original length: 358 cm
Accession No.
1990.178.1
Type of Record
Museum Artifact
Less detail

PLOW

https://search.bvmuseum.org/link/artifacts1069
Material
METAL-STEEL;
Description
Green, steel plow with two handles for steering and a large plow blade on the bottom. A hitch extends out the front of plow for hooking up to livestock.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Green, steel plow with two handles for steering and a large plow blade on the bottom. A hitch extends out the front of plow for hooking up to livestock.
History Of Use
Plow was used for breaking ground and turning soil. Animal powered, there is a hitch on the front for attaching to livestock.
Material
METAL-STEEL;
Height
122
Width
70
Length
263
Units Of Measurement
Centimeters
Accession No.
1990.0179.0001
Type of Record
Museum Artifact
Less detail

PLOW

https://search.bvmuseum.org/link/artifacts1071
Material
METAL-STEEL;
Description
An all metal plow with three wheels and blade underneath. One large metal rimmed and spoked wheel exists on the right of plow and smaller all metal rimmed and spoked on the right and small pivoting one in the rear. 'JOHN DEERE 272' 'G154-A' is cast into the metal frame of plow.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
An all metal plow with three wheels and blade underneath. One large metal rimmed and spoked wheel exists on the right of plow and smaller all metal rimmed and spoked on the right and small pivoting one in the rear. 'JOHN DEERE 272' 'G154-A' is cast into the metal frame of plow.
History Of Use
John Deere plow pulled by livestock in order to cultivate the land.
Material
METAL-STEEL;
Height
133
Width
126
Length
176
Units Of Measurement
Centimeters
Accession No.
1990.0182.0001
Type of Record
Museum Artifact
Less detail

Push Mower

https://search.bvmuseum.org/link/artifacts2889
Material
METAL / ALLOY - UNKNOWN
WOOD-UNKNOWN;
Description
A metal push mower with a wooden handle. Inscribed with "SMART BROCKVILLE 14 IN".
Original Owner
According to the donation record, this item came from Leslie and Joyce Hatfield who in turn inherited it from in-laws. These in-laws moved from Oregon with the item.
Other Names
Lawn mower
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
A metal push mower with a wooden handle. Inscribed with "SMART BROCKVILLE 14 IN".
Material
METAL / ALLOY - UNKNOWN
WOOD-UNKNOWN;
Height
125.5
Width
49.5
Length
34
Units Of Measurement
Centimeters
Accession No.
2012.0078.01
Type of Record
Museum Artifact
Less detail

SCYTHE

https://search.bvmuseum.org/link/artifacts1523
Material
METAL-STEEL;
Description
Scythe is a long, narrow, gently curved metal blade. The back side of the blade us grooved at the center below the thick, smooth top. The back (handle) end of the blade is hook shaped with a small protruding tip. There are some legible markings 'NT CO.' 'S. 47'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
AGRICULTURAL TOOLS AND EQUIPMENT
Description
Scythe is a long, narrow, gently curved metal blade. The back side of the blade us grooved at the center below the thick, smooth top. The back (handle) end of the blade is hook shaped with a small protruding tip. There are some legible markings 'NT CO.' 'S. 47'.
History Of Use
Scythes were used for mowing grass and reapinging crops. It is possible that this scythe was used on the Bayson farm.
Material
METAL-STEEL;
Width
6
Length
59.5
Depth
1.4
Units Of Measurement
Centimeters
Accession No.
1995.0098.0001
Photograph or Negative No.
None
Type of Record
Museum Artifact
Less detail

2109 records – page 1 of 106.