More like 'AIR HAMMER BIT'

2007 records – page 1 of 101.

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1535
Material
METAL-STEEL;
Description
Air hammer drill bit has a 14cm shank with a arrow-head shape bit with tip filed off. The last 6cm of the shank is smaller in circumference in order for it to fit in chuck of air hammer. Visible cast markings on the shank: 'M2'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer drill bit has a 14cm shank with a arrow-head shape bit with tip filed off. The last 6cm of the shank is smaller in circumference in order for it to fit in chuck of air hammer. Visible cast markings on the shank: 'M2'.
History Of Use
Bit used in air hammer for assorted use.
Material
METAL-STEEL;
Width
3
Length
20.5
Units Of Measurement
Centimeters
Accession No.
1996.0010.0001
Type of Record
Museum Artifact
Less detail

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1536
Material
METAL-STEEL;
Description
Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
History Of Use
Bit used in air hammer for different purposes.
Material
METAL-STEEL;
Length
17
Circumference
7
Units Of Measurement
Centimeters
Accession No.
1996.0011.0001
Type of Record
Museum Artifact
Less detail

JACK HAMMER BIT

https://search.bvmuseum.org/link/artifacts1599
Material
METAL-STEEL;
Description
Jack hammer bit is a rectangular metal bar with metal ridge in center on both sides and a chisel-like bit at end. Visible markings '1 1/4 DTDHS 2'
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Jack hammer bit is a rectangular metal bar with metal ridge in center on both sides and a chisel-like bit at end. Visible markings '1 1/4 DTDHS 2'
History Of Use
Jack hammer bit was used for various metalworking purposes.
Material
METAL-STEEL;
Units Of Measurement
Centimeters
Accession No.
1996.0074.0001
Type of Record
Museum Artifact
Less detail

AIR-HAMMER PUNCH

https://search.bvmuseum.org/link/artifacts1549
Material
METAL-STEEL;
Description
Air hammer punch is a solid, cylindrical metal object with a small notch on the side. The tip of punch has a tapered, round end with a small protruding, round notch on end. There is signs of wear on the tapered end of punch suggesting that it may have been modified. Some nicks in the metal on th…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer punch is a solid, cylindrical metal object with a small notch on the side. The tip of punch has a tapered, round end with a small protruding, round notch on end. There is signs of wear on the tapered end of punch suggesting that it may have been modified. Some nicks in the metal on the head.
History Of Use
Air hammer punch for multiple use in metalworking.
Material
METAL-STEEL;
Length
14
Circumference
7.5
Units Of Measurement
Centimeters
Accession No.
1996.0024.0001
Type of Record
Museum Artifact
Less detail

BALL-PEEN HAMMER

https://search.bvmuseum.org/link/artifacts1582
Material
METAL-STEEL;
Description
Ball peen hammer has a long narrow handle with small hole in the hand and a modified hexagon head that appears to be two nuts on a large bolt welded to the handle. On one face of the hammer, the 2.5cm nut is slightly rounded on the end with a small round indentation in the center. The other face …
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Ball peen hammer has a long narrow handle with small hole in the hand and a modified hexagon head that appears to be two nuts on a large bolt welded to the handle. On one face of the hammer, the 2.5cm nut is slightly rounded on the end with a small round indentation in the center. The other face of the hammer is a 1cm wide hexagon bolt. Threads of the bolt are visible on the hammer head.
History Of Use
Ball peen hammer was used in metalworking and blacksmithing purposes. This particular hammer is homemade consisting of a large nut and bolt welded to a metal rod.
Material
METAL-STEEL;
Width
6.8
Length
34
Units Of Measurement
Centimeters
Accession No.
1996.0057.0001
Type of Record
Museum Artifact
Less detail

COLD SET HAMMER

https://search.bvmuseum.org/link/artifacts1483
Material
METAL-STEEL;
Description
Cold set is similar to a straight peen hammer except that force is applied to the face by hammering. The chisel-like bit is used for cutting metal. No handle. Face is slightly mushroomed from use.
Other Names
COLD SATE
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Cold set is similar to a straight peen hammer except that force is applied to the face by hammering. The chisel-like bit is used for cutting metal. No handle. Face is slightly mushroomed from use.
History Of Use
Cold set is used with a hammer to cut metals in blacksmith use.
Material
METAL-STEEL;
Width
4
Length
17.5
Depth
4
Units Of Measurement
Centimeters
Accession No.
1995.0058.0001
Type of Record
Museum Artifact
Less detail

Cross Peen Hammer

https://search.bvmuseum.org/link/artifacts439
Material
METAL-STEEL;
WOOD-UNKNOWN;
Description
A hammer with a 34cm long, wooden, rounded handle. Fitted onto this is a metal head with a rounded, flat end and a pointed, wedge-shaped end. The head is grooved in places.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
A hammer with a 34cm long, wooden, rounded handle. Fitted onto this is a metal head with a rounded, flat end and a pointed, wedge-shaped end. The head is grooved in places.
History Of Use
Hammer used for blacksmithing purposes.
Material
METAL-STEEL;
WOOD-UNKNOWN;
Width
13.5
Length
39.5
Units Of Measurement
Centimeters
Accession No.
1979.115.40 a
Type of Record
Museum Artifact

Images

Less detail

Cross Peen Hammer

https://search.bvmuseum.org/link/artifacts441
Material
METAL-STEEL;
WOOD-UNKNOWN;
Description
A hammer with a 29.4cm long, rounded, wooden handle. Fitted onto this is a metal head with a rounded, flat end and a pointed wedge-shaped end.
Other Names
BLACKSMITH
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
A hammer with a 29.4cm long, rounded, wooden handle. Fitted onto this is a metal head with a rounded, flat end and a pointed wedge-shaped end.
History Of Use
Hammer used for blacksmithing purposes. Used for striking pieces of red-hot metal in order to shape them.
Material
METAL-STEEL;
WOOD-UNKNOWN;
Height
4
Width
12
Length
33
Units Of Measurement
Centimeters
Accession No.
1979.115.40 b
Type of Record
Museum Artifact

Images

Less detail

RAILWAY CAR INSPECTOR HAMMER

https://search.bvmuseum.org/link/artifacts1482
Material
METAL-STEEL; WOOD/UNKNOWN
Description
Railway car inspector hammer had a 4cm diameter face and a 9cm curved hooked on back. 3cm of a wooden handle remains. Face is slightly mushroomed from use.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Railway car inspector hammer had a 4cm diameter face and a 9cm curved hooked on back. 3cm of a wooden handle remains. Face is slightly mushroomed from use.
History Of Use
Railway car inspector hammer head used on the C.N.R. The hook on back was used for opening journal boxes.
Material
METAL-STEEL; WOOD/UNKNOWN
Width
4.5
Length
16
Units Of Measurement
Centimeters
Accession No.
1995.0057.0001
Type of Record
Museum Artifact
Less detail

ROUND PUNCH HAMMER

https://search.bvmuseum.org/link/artifacts1480
Material
METAL-STEEL;
Description
Round punch is a long narrow hammer head with a 9.5cm tappered round metal bit. The face is worn and the punch has a hole on the top for a potential handle. Visible cast marks 'WARREN'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Round punch is a long narrow hammer head with a 9.5cm tappered round metal bit. The face is worn and the punch has a hole on the top for a potential handle. Visible cast marks 'WARREN'.
History Of Use
Punches are used to punch holes in hot metal. Used with a bolster (the base) when punching a hole.
Material
METAL-STEEL;
Width
3
Length
19
Depth
3.3
Units Of Measurement
Centimeters
Accession No.
1995.0055.0001
Type of Record
Museum Artifact
Less detail

ROUND PUNCH HAMMER

https://search.bvmuseum.org/link/artifacts1551
Material
METAL-STEEL; PAINT
Description
Round punch is a long narrow hammer head with a 10.5cm tapered round metal bit. The face is a square shape with rounded edges from wear and use. There is a hole for a handle in the middle of the punch. Visible cast marks 'WARREN' and on the opposite side '5/8'. Traces of old black paint.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Round punch is a long narrow hammer head with a 10.5cm tapered round metal bit. The face is a square shape with rounded edges from wear and use. There is a hole for a handle in the middle of the punch. Visible cast marks 'WARREN' and on the opposite side '5/8'. Traces of old black paint.
History Of Use
Punches were used to punch holes in hot metal. Used with a bolster (the base) when punching a hole.
Material
METAL-STEEL; PAINT
Width
3.5
Length
19.3
Depth
3.5
Units Of Measurement
Centimeters
Accession No.
1996.0026.0001
Type of Record
Museum Artifact
Less detail

SCALING HAMMER

https://search.bvmuseum.org/link/artifacts1484
Material
METAL-STEEL;
Description
Scaling hammer with cross peen and straight peen head. Hole for handle in top of head. No handle.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Scaling hammer with cross peen and straight peen head. Hole for handle in top of head. No handle.
History Of Use
Scaling hammer used for blacksmithing.
Material
METAL-STEEL;
Width
2.5
Length
13.5
Depth
2.5
Units Of Measurement
Centimeters
Accession No.
1995.0059.0001
Type of Record
Museum Artifact
Less detail

Set Hammer

https://search.bvmuseum.org/link/artifacts447
Material
METAL-STEEL;
WOOD-UNKNOWN;
Description
A hammer with a 25.5cm long, rounded, wooden handle. This is fitted into a metal head with one rounded end and a flat end.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
A hammer with a 25.5cm long, rounded, wooden handle. This is fitted into a metal head with one rounded end and a flat end.
History Of Use
Hammer used for blacksmithing purposes.
Material
METAL-STEEL;
WOOD-UNKNOWN;
Height
4
Width
7.5
Length
30
Units Of Measurement
Centimeters
Accession No.
1979.115.40 h
Type of Record
Museum Artifact

Images

Less detail

SET HAMMER

https://search.bvmuseum.org/link/artifacts1537
Material
METAL-STEEL; WOOD-UNKNOWN;
Description
Hammer has 29cm rounded, wooden handle with head similar to small sledge style except that it is one sided.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Hammer has 29cm rounded, wooden handle with head similar to small sledge style except that it is one sided.
History Of Use
Hammer used for blacksmithing purposes.
Material
METAL-STEEL; WOOD-UNKNOWN;
Width
8
Length
33
Depth
4
Units Of Measurement
Centimeters
Accession No.
1996.0012.0001
Type of Record
Museum Artifact
Less detail

SET HAMMER

https://search.bvmuseum.org/link/artifacts1554
Material
METAL-STEEL;
Description
Set hammer head has no handle and is similar to a one-sided sledge but smaller. There is a 2.5cm oval hole for a handle and head has extreme mushrooming from hammered use. The face is square and flat with small oval indent on each corner 2cm up from face.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Set hammer head has no handle and is similar to a one-sided sledge but smaller. There is a 2.5cm oval hole for a handle and head has extreme mushrooming from hammered use. The face is square and flat with small oval indent on each corner 2cm up from face.
History Of Use
Set hammer is used for blacksmithing purposes.
Material
METAL-STEEL;
Width
3.5
Length
8.5
Depth
3.5
Units Of Measurement
Centimeters
Accession No.
1996.0029.0001
Type of Record
Museum Artifact
Less detail

SLEDGE HAMMER

https://search.bvmuseum.org/link/artifacts442
Material
METAL-STEEL; WOOD-UNKNOWN;
Description
Hammer has 25.5cm long, rounded, wooden handle with sledge style head, 3.5cm squared ends. Visible markings '57' '8Ç' 'MADE IN CANADA'. Four nails are in eye through to handle.
Other Names
BLACKSMITH
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Hammer has 25.5cm long, rounded, wooden handle with sledge style head, 3.5cm squared ends. Visible markings '57' '8Ç' 'MADE IN CANADA'. Four nails are in eye through to handle.
History Of Use
Hammer used for blacksmithing purposes.
Material
METAL-STEEL; WOOD-UNKNOWN;
Height
4.5
Width
14.5
Length
30
Units Of Measurement
Centimeters
Accession No.
1979.0115.0040.3
Type of Record
Museum Artifact
Less detail

SLEDGE HAMMER

https://search.bvmuseum.org/link/artifacts445
Material
METAL-STEEL; WOOD-UNKNOWN;
Description
Hammer has 33cm round, wooden handle with large, sledge head 5.5cm wide on either side. Visible markings '8 LBS' 'SOLID STEEL' 'W. GILPIN' and a logo which has a crown with 'W.G.' surrounded by a jagged circle.
Other Names
BLACKSMITH
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Hammer has 33cm round, wooden handle with large, sledge head 5.5cm wide on either side. Visible markings '8 LBS' 'SOLID STEEL' 'W. GILPIN' and a logo which has a crown with 'W.G.' surrounded by a jagged circle.
History Of Use
Hammer used for blacksmithing purposes.
Material
METAL-STEEL; WOOD-UNKNOWN;
Height
5.5
Width
17.5
Length
38.5
Units Of Measurement
Centimeters
Accession No.
1979.0115.0040.6
Type of Record
Museum Artifact
Less detail

Sledge hammer

https://search.bvmuseum.org/link/artifacts444
Material
METAL-STEEL; WOOD-UNKNOWN;
Description
Hammer has a 29 cm round, wooden handle with large, sledge head 6 cm wide on either side. Sunken eye.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Hammer has a 29 cm round, wooden handle with large, sledge head 6 cm wide on either side. Sunken eye.
History Of Use
Hammer used for blacksmithing purposes.
Material
METAL-STEEL; WOOD-UNKNOWN;
Height
5.5
Width
16.5
Length
34.5
Units Of Measurement
Centimeters
Accession No.
1979.115.40 e
Type of Record
Museum Artifact

Images

Less detail

STRAIGHT-PEEN HAMMER

https://search.bvmuseum.org/link/artifacts1479
Material
METAL-STEEL;
Description
Straight peen hammer head is 4cm wide with a chisel like end and a mushroomed face from use. No handle.
Other Names
HAMMER HEAD
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Straight peen hammer head is 4cm wide with a chisel like end and a mushroomed face from use. No handle.
History Of Use
Straight peen hammer head usually has a wooden handle and would have been used for blacksmithing.
Material
METAL-STEEL;
Width
4
Length
13.5
Depth
3.5
Units Of Measurement
Centimeters
Accession No.
1995.0054.0001
Type of Record
Museum Artifact
Less detail

STRAIGHT-PEEN HAMMER

https://search.bvmuseum.org/link/artifacts1552
Material
METAL-STEEL;
Description
Straight peen hammer head has a 4cm vertical, chisel-like bit witha hole for handle near face. Face is extremely mushroomed from use. Visible cast marks '2 1/2 lbs'
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Straight peen hammer head has a 4cm vertical, chisel-like bit witha hole for handle near face. Face is extremely mushroomed from use. Visible cast marks '2 1/2 lbs'
History Of Use
Straight peen hammer head usually has wooden handle and would have been used for various blacksmith use.
Material
METAL-STEEL;
Width
4
Length
16.5
Depth
3.5
Units Of Measurement
Centimeters
Accession No.
1996.0027.0001
Type of Record
Museum Artifact
Less detail

2007 records – page 1 of 101.