More like 'AIR HAMMER BIT'
Narrow Results By
AIR HAMMER BIT
https://search.bvmuseum.org/link/artifacts1536
- Material
- METAL-STEEL;
- Description
- Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
- History Of Use
- Bit used in air hammer for different purposes.
- Material
- METAL-STEEL;
- Length
- 17
- Circumference
- 7
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0011.0001
- Type of Record
- Museum Artifact
AIR HAMMER BIT
https://search.bvmuseum.org/link/artifacts1616
- Material
- METAL-STEEL;
- Description
- Air hammer bit is a round, cylindrical item with the end 5cm squared off. There is a flat depression on the side measuring 2.25cm by 6cm, this part went in the chuck of air hammer to prevent bit from slipping.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Air hammer bit is a round, cylindrical item with the end 5cm squared off. There is a flat depression on the side measuring 2.25cm by 6cm, this part went in the chuck of air hammer to prevent bit from slipping.
- History Of Use
- Air hammer bit used for miscellaneous metalworking purposes.
- Material
- METAL-STEEL;
- Width
- 3
- Length
- 13.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0091.0001
- Type of Record
- Museum Artifact
JACK HAMMER BIT
https://search.bvmuseum.org/link/artifacts1599
- Material
- METAL-STEEL;
- Description
- Jack hammer bit is a rectangular metal bar with metal ridge in center on both sides and a chisel-like bit at end. Visible markings '1 1/4 DTDHS 2'
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Jack hammer bit is a rectangular metal bar with metal ridge in center on both sides and a chisel-like bit at end. Visible markings '1 1/4 DTDHS 2'
- History Of Use
- Jack hammer bit was used for various metalworking purposes.
- Material
- METAL-STEEL;
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0074.0001
- Type of Record
- Museum Artifact
AIR-HAMMER PUNCH
https://search.bvmuseum.org/link/artifacts1549
- Material
- METAL-STEEL;
- Description
- Air hammer punch is a solid, cylindrical metal object with a small notch on the side. The tip of punch has a tapered, round end with a small protruding, round notch on end. There is signs of wear on the tapered end of punch suggesting that it may have been modified. Some nicks in the metal on th…
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Air hammer punch is a solid, cylindrical metal object with a small notch on the side. The tip of punch has a tapered, round end with a small protruding, round notch on end. There is signs of wear on the tapered end of punch suggesting that it may have been modified. Some nicks in the metal on the head.
- History Of Use
- Air hammer punch for multiple use in metalworking.
- Material
- METAL-STEEL;
- Length
- 14
- Circumference
- 7.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0024.0001
- Type of Record
- Museum Artifact
BALL-PEEN HAMMER
https://search.bvmuseum.org/link/artifacts1582
- Material
- METAL-STEEL;
- Description
- Ball peen hammer has a long narrow handle with small hole in the hand and a modified hexagon head that appears to be two nuts on a large bolt welded to the handle. On one face of the hammer, the 2.5cm nut is slightly rounded on the end with a small round indentation in the center. The other face …
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Ball peen hammer has a long narrow handle with small hole in the hand and a modified hexagon head that appears to be two nuts on a large bolt welded to the handle. On one face of the hammer, the 2.5cm nut is slightly rounded on the end with a small round indentation in the center. The other face of the hammer is a 1cm wide hexagon bolt. Threads of the bolt are visible on the hammer head.
- History Of Use
- Ball peen hammer was used in metalworking and blacksmithing purposes. This particular hammer is homemade consisting of a large nut and bolt welded to a metal rod.
- Material
- METAL-STEEL;
- Width
- 6.8
- Length
- 34
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0057.0001
- Type of Record
- Museum Artifact
COLD SET HAMMER
https://search.bvmuseum.org/link/artifacts1483
- Material
- METAL-STEEL;
- Description
- Cold set is similar to a straight peen hammer except that force is applied to the face by hammering. The chisel-like bit is used for cutting metal. No handle. Face is slightly mushroomed from use.
- Other Names
- COLD SATE
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Cold set is similar to a straight peen hammer except that force is applied to the face by hammering. The chisel-like bit is used for cutting metal. No handle. Face is slightly mushroomed from use.
- History Of Use
- Cold set is used with a hammer to cut metals in blacksmith use.
- Material
- METAL-STEEL;
- Width
- 4
- Length
- 17.5
- Depth
- 4
- Units Of Measurement
- Centimeters
- Accession No.
- 1995.0058.0001
- Type of Record
- Museum Artifact
Cross Peen Hammer
https://search.bvmuseum.org/link/artifacts439
- Material
- METAL-STEEL;
- WOOD-UNKNOWN;
- Description
- A hammer with a 34cm long, wooden, rounded handle. Fitted onto this is a metal head with a rounded, flat end and a pointed, wedge-shaped end. The head is grooved in places.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- A hammer with a 34cm long, wooden, rounded handle. Fitted onto this is a metal head with a rounded, flat end and a pointed, wedge-shaped end. The head is grooved in places.
- History Of Use
- Hammer used for blacksmithing purposes.
- Material
- METAL-STEEL;
- WOOD-UNKNOWN;
- Width
- 13.5
- Length
- 39.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1979.115.40 a
- Type of Record
- Museum Artifact
Images
Cross Peen Hammer
https://search.bvmuseum.org/link/artifacts441
- Material
- METAL-STEEL;
- WOOD-UNKNOWN;
- Description
- A hammer with a 29.4cm long, rounded, wooden handle. Fitted onto this is a metal head with a rounded, flat end and a pointed wedge-shaped end.
- Other Names
- BLACKSMITH
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- A hammer with a 29.4cm long, rounded, wooden handle. Fitted onto this is a metal head with a rounded, flat end and a pointed wedge-shaped end.
- History Of Use
- Hammer used for blacksmithing purposes. Used for striking pieces of red-hot metal in order to shape them.
- Material
- METAL-STEEL;
- WOOD-UNKNOWN;
- Height
- 4
- Width
- 12
- Length
- 33
- Units Of Measurement
- Centimeters
- Accession No.
- 1979.115.40 b
- Type of Record
- Museum Artifact
Images
RAILWAY CAR INSPECTOR HAMMER
https://search.bvmuseum.org/link/artifacts1482
- Material
- METAL-STEEL; WOOD/UNKNOWN
- Description
- Railway car inspector hammer had a 4cm diameter face and a 9cm curved hooked on back. 3cm of a wooden handle remains. Face is slightly mushroomed from use.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Railway car inspector hammer had a 4cm diameter face and a 9cm curved hooked on back. 3cm of a wooden handle remains. Face is slightly mushroomed from use.
- History Of Use
- Railway car inspector hammer head used on the C.N.R. The hook on back was used for opening journal boxes.
- Material
- METAL-STEEL; WOOD/UNKNOWN
- Width
- 4.5
- Length
- 16
- Units Of Measurement
- Centimeters
- Accession No.
- 1995.0057.0001
- Type of Record
- Museum Artifact
ROUND PUNCH HAMMER
https://search.bvmuseum.org/link/artifacts1480
- Material
- METAL-STEEL;
- Description
- Round punch is a long narrow hammer head with a 9.5cm tappered round metal bit. The face is worn and the punch has a hole on the top for a potential handle. Visible cast marks 'WARREN'.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Round punch is a long narrow hammer head with a 9.5cm tappered round metal bit. The face is worn and the punch has a hole on the top for a potential handle. Visible cast marks 'WARREN'.
- History Of Use
- Punches are used to punch holes in hot metal. Used with a bolster (the base) when punching a hole.
- Material
- METAL-STEEL;
- Width
- 3
- Length
- 19
- Depth
- 3.3
- Units Of Measurement
- Centimeters
- Accession No.
- 1995.0055.0001
- Type of Record
- Museum Artifact
ROUND PUNCH HAMMER
https://search.bvmuseum.org/link/artifacts1551
- Material
- METAL-STEEL; PAINT
- Description
- Round punch is a long narrow hammer head with a 10.5cm tapered round metal bit. The face is a square shape with rounded edges from wear and use. There is a hole for a handle in the middle of the punch. Visible cast marks 'WARREN' and on the opposite side '5/8'. Traces of old black paint.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Round punch is a long narrow hammer head with a 10.5cm tapered round metal bit. The face is a square shape with rounded edges from wear and use. There is a hole for a handle in the middle of the punch. Visible cast marks 'WARREN' and on the opposite side '5/8'. Traces of old black paint.
- History Of Use
- Punches were used to punch holes in hot metal. Used with a bolster (the base) when punching a hole.
- Material
- METAL-STEEL; PAINT
- Width
- 3.5
- Length
- 19.3
- Depth
- 3.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0026.0001
- Type of Record
- Museum Artifact
SCALING HAMMER
https://search.bvmuseum.org/link/artifacts1484
- Material
- METAL-STEEL;
- Description
- Scaling hammer with cross peen and straight peen head. Hole for handle in top of head. No handle.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Scaling hammer with cross peen and straight peen head. Hole for handle in top of head. No handle.
- History Of Use
- Scaling hammer used for blacksmithing.
- Material
- METAL-STEEL;
- Width
- 2.5
- Length
- 13.5
- Depth
- 2.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1995.0059.0001
- Type of Record
- Museum Artifact
Set Hammer
https://search.bvmuseum.org/link/artifacts447
- Material
- METAL-STEEL;
- WOOD-UNKNOWN;
- Description
- A hammer with a 25.5cm long, rounded, wooden handle. This is fitted into a metal head with one rounded end and a flat end.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- A hammer with a 25.5cm long, rounded, wooden handle. This is fitted into a metal head with one rounded end and a flat end.
- History Of Use
- Hammer used for blacksmithing purposes.
- Material
- METAL-STEEL;
- WOOD-UNKNOWN;
- Height
- 4
- Width
- 7.5
- Length
- 30
- Units Of Measurement
- Centimeters
- Accession No.
- 1979.115.40 h
- Type of Record
- Museum Artifact
Images
SET HAMMER
https://search.bvmuseum.org/link/artifacts1537
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Description
- Hammer has 29cm rounded, wooden handle with head similar to small sledge style except that it is one sided.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Hammer has 29cm rounded, wooden handle with head similar to small sledge style except that it is one sided.
- History Of Use
- Hammer used for blacksmithing purposes.
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Width
- 8
- Length
- 33
- Depth
- 4
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0012.0001
- Type of Record
- Museum Artifact
SET HAMMER
https://search.bvmuseum.org/link/artifacts1554
- Material
- METAL-STEEL;
- Description
- Set hammer head has no handle and is similar to a one-sided sledge but smaller. There is a 2.5cm oval hole for a handle and head has extreme mushrooming from hammered use. The face is square and flat with small oval indent on each corner 2cm up from face.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Set hammer head has no handle and is similar to a one-sided sledge but smaller. There is a 2.5cm oval hole for a handle and head has extreme mushrooming from hammered use. The face is square and flat with small oval indent on each corner 2cm up from face.
- History Of Use
- Set hammer is used for blacksmithing purposes.
- Material
- METAL-STEEL;
- Width
- 3.5
- Length
- 8.5
- Depth
- 3.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0029.0001
- Type of Record
- Museum Artifact
SLEDGE HAMMER
https://search.bvmuseum.org/link/artifacts442
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Description
- Hammer has 25.5cm long, rounded, wooden handle with sledge style head, 3.5cm squared ends. Visible markings '57' '8Ç' 'MADE IN CANADA'. Four nails are in eye through to handle.
- Other Names
- BLACKSMITH
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Hammer has 25.5cm long, rounded, wooden handle with sledge style head, 3.5cm squared ends. Visible markings '57' '8Ç' 'MADE IN CANADA'. Four nails are in eye through to handle.
- History Of Use
- Hammer used for blacksmithing purposes.
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Height
- 4.5
- Width
- 14.5
- Length
- 30
- Units Of Measurement
- Centimeters
- Accession No.
- 1979.0115.0040.3
- Type of Record
- Museum Artifact
SLEDGE HAMMER
https://search.bvmuseum.org/link/artifacts445
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Description
- Hammer has 33cm round, wooden handle with large, sledge head 5.5cm wide on either side. Visible markings '8 LBS' 'SOLID STEEL' 'W. GILPIN' and a logo which has a crown with 'W.G.' surrounded by a jagged circle.
- Other Names
- BLACKSMITH
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Hammer has 33cm round, wooden handle with large, sledge head 5.5cm wide on either side. Visible markings '8 LBS' 'SOLID STEEL' 'W. GILPIN' and a logo which has a crown with 'W.G.' surrounded by a jagged circle.
- History Of Use
- Hammer used for blacksmithing purposes.
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Height
- 5.5
- Width
- 17.5
- Length
- 38.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1979.0115.0040.6
- Type of Record
- Museum Artifact
Sledge hammer
https://search.bvmuseum.org/link/artifacts444
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Description
- Hammer has a 29 cm round, wooden handle with large, sledge head 6 cm wide on either side. Sunken eye.
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Hammer has a 29 cm round, wooden handle with large, sledge head 6 cm wide on either side. Sunken eye.
- History Of Use
- Hammer used for blacksmithing purposes.
- Material
- METAL-STEEL; WOOD-UNKNOWN;
- Height
- 5.5
- Width
- 16.5
- Length
- 34.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1979.115.40 e
- Type of Record
- Museum Artifact
Images
STRAIGHT-PEEN HAMMER
https://search.bvmuseum.org/link/artifacts1479
- Material
- METAL-STEEL;
- Description
- Straight peen hammer head is 4cm wide with a chisel like end and a mushroomed face from use. No handle.
- Other Names
- HAMMER HEAD
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Straight peen hammer head is 4cm wide with a chisel like end and a mushroomed face from use. No handle.
- History Of Use
- Straight peen hammer head usually has a wooden handle and would have been used for blacksmithing.
- Material
- METAL-STEEL;
- Width
- 4
- Length
- 13.5
- Depth
- 3.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1995.0054.0001
- Type of Record
- Museum Artifact
STRAIGHT-PEEN HAMMER
https://search.bvmuseum.org/link/artifacts1552
- Material
- METAL-STEEL;
- Description
- Straight peen hammer head has a 4cm vertical, chisel-like bit witha hole for handle near face. Face is extremely mushroomed from use. Visible cast marks '2 1/2 lbs'
- Category
- TOOLS AND EQUIPMENT FOR MATERIALS
- Sub-Category
- METALWORKING TOOLS AND EQUIPMENT
- Description
- Straight peen hammer head has a 4cm vertical, chisel-like bit witha hole for handle near face. Face is extremely mushroomed from use. Visible cast marks '2 1/2 lbs'
- History Of Use
- Straight peen hammer head usually has wooden handle and would have been used for various blacksmith use.
- Material
- METAL-STEEL;
- Width
- 4
- Length
- 16.5
- Depth
- 3.5
- Units Of Measurement
- Centimeters
- Accession No.
- 1996.0027.0001
- Type of Record
- Museum Artifact