More like 'DRILL BIT'

1984 records – page 1 of 100.

DRILL BIT

https://search.bvmuseum.org/link/artifacts871
Material
METAL-STEEL;
Description
(A)Large drill bit is 45.5cm in length with twist extending from one end to other. 15cm circumference. (B)Small drill bit is 26.5cm in length with twist extending from one end to other. 9cm circumference.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
(A)Large drill bit is 45.5cm in length with twist extending from one end to other. 15cm circumference. (B)Small drill bit is 26.5cm in length with twist extending from one end to other. 9cm circumference.
History Of Use
(A)Large drill bit (B)Small drill bit Both for use in drill.
Material
METAL-STEEL;
Units Of Measurement
Centimeters
Dimension Notes
Dimensions in Object Description
Accession No.
1987.0053.0021 a-b
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1485
Material
METAL-STEEL;
Description
Drill bit has a 4cm extension for in drill socket and a gradual thread extending 12cm up the bit.
Manufacturer Notes
0
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Drill bit has a 4cm extension for in drill socket and a gradual thread extending 12cm up the bit.
History Of Use
Drill bit used in drills.
Material
METAL-STEEL;
Width
4
Length
16
Units Of Measurement
Centimeters
Accession No.
1995.0060.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1526
Material
METAL-STEEL;
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 12.5cm of bit is smaller in circumference to fit in chuck of drill. Visible markings '1 1/2' and on opposite side 'WALTER SPENCER & CO. LTD.' 'SHEFFIELD' 'VELOSUR'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 12.5cm of bit is smaller in circumference to fit in chuck of drill. Visible markings '1 1/2' and on opposite side 'WALTER SPENCER & CO. LTD.' 'SHEFFIELD' 'VELOSUR'.
History Of Use
Drill bit used in percussive drill on the C.N.R.
Material
METAL-STEEL;
Length
37.5
Diameter
Top: 4 Base: 3
Circumference
11.5
Units Of Measurement
Centimeters
Accession No.
1996.0001.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1527
Material
METAL-STEEL;
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 13cm of drill bit is smaller in circumference in order to fit in chuck of drill.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 13cm of drill bit is smaller in circumference in order to fit in chuck of drill.
History Of Use
Drill bit used in percussive drill on the C.N.R.
Material
METAL-STEEL;
Length
32
Diameter
Top: 4 Base: 3
Circumference
11.5
Units Of Measurement
Centimeters
Accession No.
1996.0002.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1528
Material
METAL-STEEL;
Description
Large drill has twist extending the full length from one end to the other. The bottom 13cm is slightly tapered to fit in chuck of drill.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Large drill has twist extending the full length from one end to the other. The bottom 13cm is slightly tapered to fit in chuck of drill.
History Of Use
Drill bit used in percussive drill on the C.N.R.
Material
METAL-STEEL;
Length
30
Diameter
Top: 3.5 Base: 3
Circumference
10.5
Units Of Measurement
Centimeters
Accession No.
1996.0003.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1529
Material
METAL-STEEL;
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 13.5cm is slightly tapered to fit in the chuck of drill. Some metal scarring on the end from the drill chuck.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 13.5cm is slightly tapered to fit in the chuck of drill. Some metal scarring on the end from the drill chuck.
History Of Use
Drill bit used in percussive drill on the C.N.R.
Material
METAL-STEEL;
Length
30.5
Diameter
Top: 3 Base: 2.5
Circumference
9.5
Units Of Measurement
Centimeters
Accession No.
1996.0004.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1530
Material
METAL-STEEL;
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 11.5cm is slightly tapered to fit in the chuck of drill. Some of the chuck end of bit appears to been twisted off leaving a rough edge.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 11.5cm is slightly tapered to fit in the chuck of drill. Some of the chuck end of bit appears to been twisted off leaving a rough edge.
History Of Use
Drill bit used in percussive drill on the C.N.R.
Material
METAL-STEEL;
Length
30.5
Diameter
Top: 3.5 Base: 3
Circumference
10
Units Of Measurement
Centimeters
Accession No.
1996.0005.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1532
Material
METAL-STEEL;
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 15.5cm is slightly tapered to fit in the chuck of drill. Visible markings 'WALTER SPENCER & CO. LTD.' 'SHEFFIELD' 'VELOSUR' and on the opposite end '1 3/4'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Large drill bit has twist extending the full length from one end to the other. The bottom 15.5cm is slightly tapered to fit in the chuck of drill. Visible markings 'WALTER SPENCER & CO. LTD.' 'SHEFFIELD' 'VELOSUR' and on the opposite end '1 3/4'.
History Of Use
Drill bit used in percussive drill on the C.N.R.
Material
METAL-STEEL;
Length
38
Diameter
Top: 4.5 Base: 4
Circumference
13.5
Units Of Measurement
Centimeters
Accession No.
1996.0007.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1533
Material
METAL-STEEL;
Description
Drill bit has a 14cm shank with a 2.5cm flat piece at end on either side. The actual drill piece has a 6.5cm twist and a raised 4cm collar with the following visible cast marks: 'PATENT APPLIED FOR THE WHITMAN & BARNES' 'MFG. CO., AKRON, OHIO' 'MADE IN U.S.A.' 'HERCULES CO.' in a flat diamond shape…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Drill bit has a 14cm shank with a 2.5cm flat piece at end on either side. The actual drill piece has a 6.5cm twist and a raised 4cm collar with the following visible cast marks: 'PATENT APPLIED FOR THE WHITMAN & BARNES' 'MFG. CO., AKRON, OHIO' 'MADE IN U.S.A.' 'HERCULES CO.' in a flat diamond shape and '13/16' 'HIGH SPEED'.
History Of Use
Drill bit used in drills or drill press for boring metal. One side of shank is flat so that the set screw of the drill press will hold firmly, preventing slipping and injury. Used by blacksmiths, carriage and wagon makers, machine shops, etc.
Material
METAL-STEEL;
Length
20.5
Circumference
10
Units Of Measurement
Centimeters
Accession No.
1996.0008.0001
Type of Record
Museum Artifact
Less detail

DRILL BIT

https://search.bvmuseum.org/link/artifacts1534
Material
METAL-STEEL; PAINT
Description
Drill bit has a 8cm shank with a 1.5cm flat piece at end on either side. The actual drill piece has a 6.5cm twist and a slightly raised 1.5cm collar with the following visible markings: 'P & W COY' 'CANADA' '13/16'. The tip of drill bit appears to have been slightly modified and is slightly protrud…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Drill bit has a 8cm shank with a 1.5cm flat piece at end on either side. The actual drill piece has a 6.5cm twist and a slightly raised 1.5cm collar with the following visible markings: 'P & W COY' 'CANADA' '13/16'. The tip of drill bit appears to have been slightly modified and is slightly protruding. Traces of black paint that is almost worn off.
History Of Use
Drill bit used in drills or drill press for boring metal. Shank has two flat sides so that the set screw of the drill press will hold firmly, preventing slipping or injury. Used by blacksmiths, carriage and wagon makers, machine shops, etc.
Material
METAL-STEEL; PAINT
Length
14.5
Circumference
7
Units Of Measurement
Centimeters
Accession No.
1996.0009.0001
Type of Record
Museum Artifact
Less detail

Diamond Drill Bit

https://search.bvmuseum.org/link/artifacts1321
Material
METAL-STEEL;
Description
All metal diamond drill bit has a hollow cylindrical bottom shaft with screw threads on the outside. The top consists of three prongs, each with a different circular rotating bit. The bits are all facing inward and have two sets of teeth, one on the outside which is the same for all of them, and …
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
MINING AND MINERAL HARVESTING TOOLS AND EQUIPMENT
Description
All metal diamond drill bit has a hollow cylindrical bottom shaft with screw threads on the outside. The top consists of three prongs, each with a different circular rotating bit. The bits are all facing inward and have two sets of teeth, one on the outside which is the same for all of them, and one on the inside which is different from the rest. The inside set on one bit has eleven teeth, one has seven teeth and one has four teeth.
History Of Use
Diamond drill bit was used at the end drill for boring through rock in mining procedures.
Material
METAL-STEEL;
Width
7
Length
12
Depth
5.8
Units Of Measurement
Centimeters
Accession No.
1992.12.8
Type of Record
Museum Artifact

Images

Less detail

Drill Bit

https://search.bvmuseum.org/link/artifacts3737
Description
Long piece of metal that is twisted to create a drill bit.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
MINING AND MINERAL HARVESTING TOOLS AND EQUIPMENT
Description
Long piece of metal that is twisted to create a drill bit.
Narrative
Part of a steam powered diamond drill picked up from a site near Coal Creek.
Accession No.
1994.9.9
Type of Record
Museum Artifact
Less detail

Drill Bit

https://search.bvmuseum.org/link/artifacts4418
Description
Long piece of metal that is twisted to create a drill bit.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
MINING AND MINERAL HARVESTING TOOLS AND EQUIPMENT
Description
Long piece of metal that is twisted to create a drill bit.
Narrative
Part of a steam powered diamond drill picked up from a site near Coal Creek.
Accession No.
1994.9.4
Type of Record
Museum Artifact
Less detail

DRILL CHUCK KEY

https://search.bvmuseum.org/link/artifacts1501
Material
METAL-STEEL; ANIMAL-LEATHER;
Description
This small key chuck is the shape of a 'T' with an eye on the handle secured by a 46.5cm leather strap. The head of the key is a small square shape measuring .5cm.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
This small key chuck is the shape of a 'T' with an eye on the handle secured by a 46.5cm leather strap. The head of the key is a small square shape measuring .5cm.
History Of Use
This key for drill chuck was used to loosen and tighten the chuck on the drill so miscellaneous bits could be interchanged.
Material
METAL-STEEL; ANIMAL-LEATHER;
Height
6.5
Width
1.5
Length
10
Units Of Measurement
Centimeters
Accession No.
1995.0076.0001
Type of Record
Museum Artifact
Less detail

HAND DRILL

https://search.bvmuseum.org/link/artifacts947
Material
METAL-STEEL;
Description
Hand drill has a 9.5cm red wood handle with green steel lever measuring 23.5cm.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Hand drill has a 9.5cm red wood handle with green steel lever measuring 23.5cm.
History Of Use
Hand drill is adjustable to accommodate different sizes of bits.
Material
METAL-STEEL;
Length
61
Units Of Measurement
Centimeters
Accession No.
1990.0008.0003
Type of Record
Museum Artifact
Less detail

Post Drill

https://search.bvmuseum.org/link/artifacts3870
Description
Metal press drill. Wood and metal handle is used to turn three cranks, which powers the drill tip mounted to the end. Drill has two "feet" on each side to mount it upright for use. On one side it reads "CAN. BLOWER & / FORGE CO. LTD / KITCHENER / ONT". "614" is below this, indicating the model numb…
Manufacturer
Canadian Blower & Forge Company
Other Names
Press Drill
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Place Of Manufacture
Canada: Kitchener, Ontario
Description
Metal press drill. Wood and metal handle is used to turn three cranks, which powers the drill tip mounted to the end. Drill has two "feet" on each side to mount it upright for use. On one side it reads "CAN. BLOWER & / FORGE CO. LTD / KITCHENER / ONT". "614" is below this, indicating the model number.
History Of Use
Post drills were hand operated, used for drilling into metal. The drill would be mounted to a wall or post for use.
Accession No.
2017.120.1 a
Type of Record
Museum Artifact

Images

Less detail

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1535
Material
METAL-STEEL;
Description
Air hammer drill bit has a 14cm shank with a arrow-head shape bit with tip filed off. The last 6cm of the shank is smaller in circumference in order for it to fit in chuck of air hammer. Visible cast markings on the shank: 'M2'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer drill bit has a 14cm shank with a arrow-head shape bit with tip filed off. The last 6cm of the shank is smaller in circumference in order for it to fit in chuck of air hammer. Visible cast markings on the shank: 'M2'.
History Of Use
Bit used in air hammer for assorted use.
Material
METAL-STEEL;
Width
3
Length
20.5
Units Of Measurement
Centimeters
Accession No.
1996.0010.0001
Type of Record
Museum Artifact
Less detail

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1536
Material
METAL-STEEL;
Description
Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer bit has a 6cm shank to fit into the chuck with a 2cm flat chisel like end with a round indentation in the center. Visible cast marks 'CP1'.
History Of Use
Bit used in air hammer for different purposes.
Material
METAL-STEEL;
Length
17
Circumference
7
Units Of Measurement
Centimeters
Accession No.
1996.0011.0001
Type of Record
Museum Artifact
Less detail

AIR HAMMER BIT

https://search.bvmuseum.org/link/artifacts1616
Material
METAL-STEEL;
Description
Air hammer bit is a round, cylindrical item with the end 5cm squared off. There is a flat depression on the side measuring 2.25cm by 6cm, this part went in the chuck of air hammer to prevent bit from slipping.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Air hammer bit is a round, cylindrical item with the end 5cm squared off. There is a flat depression on the side measuring 2.25cm by 6cm, this part went in the chuck of air hammer to prevent bit from slipping.
History Of Use
Air hammer bit used for miscellaneous metalworking purposes.
Material
METAL-STEEL;
Width
3
Length
13.5
Units Of Measurement
Centimeters
Accession No.
1996.0091.0001
Type of Record
Museum Artifact
Less detail

CHISEL BIT

https://search.bvmuseum.org/link/artifacts865
Material
METAL-STEEL;
Description
Standard looking chisel has 2cm flat bit and the top 5.5cm is smaller in circumference so it can fit in nozzle of air hammer.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Standard looking chisel has 2cm flat bit and the top 5.5cm is smaller in circumference so it can fit in nozzle of air hammer.
History Of Use
Chisel goes into air hammer for corking or closing up seams.
Material
METAL-STEEL;
Length
20.5
Units Of Measurement
Centimeters
Accession No.
1987.0053.0015
Type of Record
Museum Artifact
Less detail

1984 records – page 1 of 100.