More like 'Blacksmith Tongs'

1979 records – page 1 of 99.

Blacksmith Tongs

https://search.bvmuseum.org/link/artifacts1430
Material
METAL/ALLOY-UNKNOWN;
Description
A long green blacksmithing tool. It has two handles that pull apart so the bottom opens. The bottom is square and rectangular.
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
A long green blacksmithing tool. It has two handles that pull apart so the bottom opens. The bottom is square and rectangular.
History Of Use
This blacksmithing tool was used by Peavine Harvey.
Material
METAL/ALLOY-UNKNOWN;
Height
3.2
Width
3.9
Length
51.5
Units Of Measurement
Centimeters
Accession No.
1994.5.6
Type of Record
Museum Artifact

Images

Less detail

Tongs

https://search.bvmuseum.org/link/artifacts638
Material
METAL-STEEL;
Description
Flexible metal wire tongs. These tongs consist of one piece of wire that has been shaped into tongs. One end of the tongs is coiled once then flares out to form the sides. These pieces then cross over each other to form loops where the wire ends. The ends of the wire were soldered but are now b…
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
CHEMICAL TOOLS AND EQUIPMENT
Description
Flexible metal wire tongs. These tongs consist of one piece of wire that has been shaped into tongs. One end of the tongs is coiled once then flares out to form the sides. These pieces then cross over each other to form loops where the wire ends. The ends of the wire were soldered but are now broken. When the sides are compressed together the loops flare out to the sides.
History Of Use
Flexible metal wire tongs used to hold a small metal pot over a flame. Presumably these tongs were used at the Telkwa Creamery which operated from 1939-1969. The tongs held a pot which was heated over a flame in order that the moisture content of the butter could be measured.
Material
METAL-STEEL;
Height
1
Width
4
Length
19.5
Units Of Measurement
Centimeters
Accession No.
1983.23.1 c
Type of Record
Museum Artifact

Images

Less detail

BLACKSMITH BLOWER

https://search.bvmuseum.org/link/artifacts1624
Material
METAL-STEEL; PAINT
Description
Blacksmith blower is round metal object with 17cm metal handle with wooden end and a visible metal fan like wheel inside a metal casing. Squared attached at the end with a round blower hole. Visible cast marks: 'CANADIAN BLOWER & FORGE CO. LTD.' 'KITCHENER, ONT.' on the fan casing mechanism and on…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Blacksmith blower is round metal object with 17cm metal handle with wooden end and a visible metal fan like wheel inside a metal casing. Squared attached at the end with a round blower hole. Visible cast marks: 'CANADIAN BLOWER & FORGE CO. LTD.' 'KITCHENER, ONT.' on the fan casing mechanism and on the opposite side of blower is the cast markings 'CAN. BLOWER & FORGE CO.' 'KITCHENER, ONT.'. Traces of red paint on the fan casing.
History Of Use
Blacksmith's blower was attached to the forge for blacksmithing purposes. The blower fed air on the coals to keep them hot when bending and working the metals.
Material
METAL-STEEL; PAINT
Height
29
Width
9.5
Length
29
Units Of Measurement
Centimeters
Accession No.
1996.0099.0001
Type of Record
Museum Artifact
Less detail

Flat Tongs

https://search.bvmuseum.org/link/artifacts456
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 26.5cm long. The jaws are 4.5cm long (from pin) and are straight lipped and open mouthed.
Other Names
Open-mouth tongs
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 26.5cm long. The jaws are 4.5cm long (from pin) and are straight lipped and open mouthed.
History Of Use
Open-mouth tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
3
Length
31.5
Units Of Measurement
Centimeters
Accession No.
1979.115.41 h
Type of Record
Museum Artifact

Images

Less detail

Flat Tongs

https://search.bvmuseum.org/link/artifacts450
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 41.5cm long. The bit is 6.5cm long (from pin) and has straight lipped jaws that don't quite close completely.
Other Names
open-mouth tongs
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 41.5cm long. The bit is 6.5cm long (from pin) and has straight lipped jaws that don't quite close completely.
History Of Use
Open-mouthed tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
2.8
Length
48.5
Units Of Measurement
Centimeters
Accession No.
1979.115.41 b
Type of Record
Museum Artifact

Images

Less detail

Flat Tongs

https://search.bvmuseum.org/link/artifacts455
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliers consisting of two long narrow pieces of iron joined by a pin at the head. The handles are 35.5cm long. The jaws are 6.5cm long (from pin) and are straight lipped and open mouthed.
Other Names
Straight Lipped Tongs
Open Mouth Tongs
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers consisting of two long narrow pieces of iron joined by a pin at the head. The handles are 35.5cm long. The jaws are 6.5cm long (from pin) and are straight lipped and open mouthed.
History Of Use
Open-mouth tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
3
Length
44
Units Of Measurement
Centimeters
Accession No.
1979.115.41 g
Type of Record
Museum Artifact

Images

Less detail

Flat Tongs

https://search.bvmuseum.org/link/artifacts1872
Material
METAL / ALLOY - UNKNOWN
Description
An all metal pair of pliers consisting of two long narrow pieces of iron joined by a pin at the head. The handles are 51cm long. The jaws are 7cm long (from pin) and are straight lipped and open mouthed.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers consisting of two long narrow pieces of iron joined by a pin at the head. The handles are 51cm long. The jaws are 7cm long (from pin) and are straight lipped and open mouthed.
Narrative
These items[2004.1.1.-2004.1.28] all belonged to Nora's husband Harvey. Nora and Harvey were married in 1954. Harvey was a heavy equipment operator and fixed appliances.
Material
METAL / ALLOY - UNKNOWN
Length
60
Units Of Measurement
Centimeters
Accession No.
2004.1.17
Type of Record
Museum Artifact

Images

Less detail

GAD TONGS

https://search.bvmuseum.org/link/artifacts454
Material
METAL/ALLOY-IRON-WROUGHT;
Description
Made by blacksmith, these gad tongs have an arced pincher bit in the shape of an oval and are an all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 48.5cm long. The jaws are 11.5cm long (from pin) and are arced with a large sideways …
Other Names
CURVED LIP TONGS/FLUTED JAW TONGS
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Made by blacksmith, these gad tongs have an arced pincher bit in the shape of an oval and are an all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 48.5cm long. The jaws are 11.5cm long (from pin) and are arced with a large sideways oval bit for rounding iron.
History Of Use
Gad tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
8.5
Length
62.5
Units Of Measurement
Centimeters
Accession No.
1979.0115.0041.6
Type of Record
Museum Artifact
Less detail

Hollow-Bit Tongs

https://search.bvmuseum.org/link/artifacts453
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliars consisting of two long narrow piece of iron joined by a pin at the head. These curve into two arced shaped pinchers. These jaws curve and then round back to form a small circle where they meet. The handles are 34.5cm long. The jaws are 11cm long (from pin).
Other Names
Curved Lip Tongs
Fluted Jaw Tongs
Gad Tongs
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliars consisting of two long narrow piece of iron joined by a pin at the head. These curve into two arced shaped pinchers. These jaws curve and then round back to form a small circle where they meet. The handles are 34.5cm long. The jaws are 11cm long (from pin).
History Of Use
Tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
12.4
Length
48.5
Units Of Measurement
Centimeters
Accession No.
1979.115.41 e
Type of Record
Museum Artifact

Images

Less detail

HOLLOW BIT TONGS

https://search.bvmuseum.org/link/artifacts1160
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 40cm long. The bit is 4.5cm long (from pin) and has a smooth rounded out center with grooves along the edges. One side of the bit is still round, the other has been somewhat flatt…
Other Names
BIT,ROUND
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 40cm long. The bit is 4.5cm long (from pin) and has a smooth rounded out center with grooves along the edges. One side of the bit is still round, the other has been somewhat flattened though there is still evidence of its original shape and grooves.
History Of Use
Used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
3.5
Length
47
Depth
1.5
Units Of Measurement
Centimeters
Accession No.
1991.0064.0001
Type of Record
Museum Artifact
Less detail

Hollow-Bit Tongs

https://search.bvmuseum.org/link/artifacts452
Material
METAL/ALLOY-IRON-WROUGHT;
Description
A pair of metal tongs consisting of two long narrow pieces of iron joined by a pin at the head. These handles curve into two arced pinchers which then round back to create a small oval where they meet. The handles are 44.5cm long. The jaws are 9cm long (from pin) and are arced with an 'O' shaped b…
Other Names
Curved-Lip Tongs
Fluted Jaw Tongs
Gad Tongs
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
A pair of metal tongs consisting of two long narrow pieces of iron joined by a pin at the head. These handles curve into two arced pinchers which then round back to create a small oval where they meet. The handles are 44.5cm long. The jaws are 9cm long (from pin) and are arced with an 'O' shaped bit for rounding iron.
History Of Use
Tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Inscriptions
On one handle "3/4".
Width
6
Length
55
Units Of Measurement
Centimeters
Accession No.
1979.115.41 d
Type of Record
Museum Artifact

Images

Less detail

Hollow-Bit Tongs

https://search.bvmuseum.org/link/artifacts1228
Material
METAL-STEEL;
Description
A long handled, metal pair of pliers with squared jaws. It consists of two narrow rectangular pieces of iron joined at the head with a metal fastener. Both ends of the fastener are rounded. The jaws are approximately 5.8cm long and 6.1cm wide when closed.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
A long handled, metal pair of pliers with squared jaws. It consists of two narrow rectangular pieces of iron joined at the head with a metal fastener. Both ends of the fastener are rounded. The jaws are approximately 5.8cm long and 6.1cm wide when closed.
Material
METAL-STEEL;
Inscriptions
One handle has '-HELLER- Made in U.S.A.' stamped on it. The other handle has '-22 3/4-' on it.
Length
55
Units Of Measurement
Centimeters
Accession No.
1991.150.1
Type of Record
Museum Artifact

Images

Less detail

OPEN MOUTHED TONGS

https://search.bvmuseum.org/link/artifacts1161
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliers fashioned of two long, narrow pieces of iron joined by a pin at the head. The handles are 55cm long. The bit is 4.2cm long from pin and the inner face is flat and square shaped. The angular flat face on one side is quite obvious. The other side has been somewhat flat…
Other Names
BIT,SQUARE
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers fashioned of two long, narrow pieces of iron joined by a pin at the head. The handles are 55cm long. The bit is 4.2cm long from pin and the inner face is flat and square shaped. The angular flat face on one side is quite obvious. The other side has been somewhat flattened. Looks handmade.
History Of Use
Used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
3.5
Length
57
Depth
2
Units Of Measurement
Centimeters
Accession No.
1991.0065.0001
Type of Record
Museum Artifact
Less detail

Pickup Tongs

https://search.bvmuseum.org/link/artifacts373
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 29cm long. The bit is 5.5cm long (from pin) and has pincers type tongs.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. The handles are 29cm long. The bit is 5.5cm long (from pin) and has pincers type tongs.
History Of Use
Blacksmith tongs from Chess Tolman's farm.
Material
METAL/ALLOY-IRON-WROUGHT;
Length
37.5
Units Of Measurement
Centimeters
Accession No.
1978.140.15
Type of Record
Museum Artifact

Images

Less detail

Pickup Tongs

https://search.bvmuseum.org/link/artifacts449
Material
METAL/ALLOY-IRON-WROUGHT;
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. One handle is slightly longer than the other one. The bit is 4.5cm (from pin) and has slightly arced jaws or pinchers that don't quite close completely.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
An all metal pair of pliers fashioned of two long narrow pieces of iron joined by a pin at the head. One handle is slightly longer than the other one. The bit is 4.5cm (from pin) and has slightly arced jaws or pinchers that don't quite close completely.
History Of Use
Pick-up tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Inscriptions
On one handle is "BC".
Width
2.5
Length
45.5
Units Of Measurement
Centimeters
Accession No.
1979.115.41 a
Type of Record
Museum Artifact

Images

Less detail

Rail Carrying Tongs

https://search.bvmuseum.org/link/artifacts1227
Material
METAL-STEEL; PAINT
Description
These tongs were originally green in color and consist of two round pieces of metal that are fastened near the jaws with a bolt through both pieces. The jaws of the tongs are arched on both sides. Although the tongs are side by side the jaws are shaped too close so that both ends meet. The handle…
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
These tongs were originally green in color and consist of two round pieces of metal that are fastened near the jaws with a bolt through both pieces. The jaws of the tongs are arched on both sides. Although the tongs are side by side the jaws are shaped too close so that both ends meet. The handles go straight back from the point where they are fastened for 19cm. Then the handles are bent outwards at a right angle. The arms extend 47cm each in length.
History Of Use
Rail tongs for carrying rails and beams of all sizes.
Material
METAL-STEEL; PAINT
Height
36.5
Width
7
Length
98
Units Of Measurement
Centimeters
Accession No.
1991.144.1
Type of Record
Museum Artifact
Less detail

RAIL TONGS

https://search.bvmuseum.org/link/artifacts1612
Material
METAL-STEEL;
Description
Rail tong is an all metal wrench-like tool with 55cm handle, curved head with pivoting lower curved jaw. The curved, arced head of rail tong is connected to the handle with the lower part of jaw connected by a pin allowing a rotating action. Small thumb on the lower jaw.
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Rail tong is an all metal wrench-like tool with 55cm handle, curved head with pivoting lower curved jaw. The curved, arced head of rail tong is connected to the handle with the lower part of jaw connected by a pin allowing a rotating action. Small thumb on the lower jaw.
History Of Use
Rail tongs used for moving and adjusting rails on C.N.
Material
METAL-STEEL;
Width
12.5
Length
73
Depth
3.5
Units Of Measurement
Centimeters
Accession No.
1996.0087.0001
Type of Record
Museum Artifact
Less detail

Tongs

https://search.bvmuseum.org/link/artifacts451
Material
METAL/ALLOY-IRON-WROUGHT;
Description
A pair of tongs made of metal fashioned by two long narrow piece of iron joined by a pin at the head. The handles are 40cm long. The jaws are 6cm long (from pin) and have a 90 degree elbow shape similar to an 'L'.
Other Names
band tongs
bent tongs
clevis tongs
Category
TOOLS AND EQUIPMENT FOR MATERIALS
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
A pair of tongs made of metal fashioned by two long narrow piece of iron joined by a pin at the head. The handles are 40cm long. The jaws are 6cm long (from pin) and have a 90 degree elbow shape similar to an 'L'.
History Of Use
Tongs used for blacksmithing.
Material
METAL/ALLOY-IRON-WROUGHT;
Width
4
Length
47.5
Units Of Measurement
Centimeters
Accession No.
1979.115.41 c
Type of Record
Museum Artifact

Images

Less detail

Blow Torch

https://search.bvmuseum.org/link/artifacts3832
Material
METAL/ALLOY-BRASS; WOOD-UNKNOWN;
Description
A brass 34cm round blow torch with a wooden handle and metal operating control on the top. Manufactures' plate is worn off. The brass fuel filler screw has the number 87 stamped on the top . On the control screw for operating the torch fuel is stamped OTTO BERNA CO ROCHESTER NY around the inner cir…
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Place Of Manufacture
United States: Rochester, New York
Description
A brass 34cm round blow torch with a wooden handle and metal operating control on the top. Manufactures' plate is worn off. The brass fuel filler screw has the number 87 stamped on the top . On the control screw for operating the torch fuel is stamped OTTO BERNA CO ROCHESTER NY around the inner circle of its' top
Material
METAL/ALLOY-BRASS; WOOD-UNKNOWN;
Accession No.
2017.98.1
Type of Record
Museum Artifact

Images

Less detail

Shell Casing

https://search.bvmuseum.org/link/artifacts2040
Material
METAL / ALLOY - UNKNOWN
Description
Shell Casing of a piece of cannon. Bottom of shell is inscribed with "20MM-MK-4", "1994" and "A.S.C"
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
METALWORKING TOOLS AND EQUIPMENT
Description
Shell Casing of a piece of cannon. Bottom of shell is inscribed with "20MM-MK-4", "1994" and "A.S.C"
Material
METAL / ALLOY - UNKNOWN
Length
17.5
Diameter
2..5
Circumference
8
Units Of Measurement
Centimeters
Accession No.
2008.1.1
Type of Record
Museum Artifact

Images

Less detail

1979 records – page 1 of 99.